Big-Data-HPC-Platform/docs/UsingConfigManager/UsingConfigManager.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<book xml:base="../">
  <bookinfo>
    <title>HPCC Configuration Manager</title>

    <mediaobject>
      <imageobject>
        <imagedata fileref="images/redswooshWithLogo3.jpg" />
      </imageobject>
    </mediaobject>

    <author>
      <surname>Boca Raton Documentation Team</surname>
    </author>

    <legalnotice>
      <para>We welcome your comments and feedback about this document via
      email to <email>docfeedback@hpccsystems.com</email></para>

      <para>Please include <emphasis role="bold">Documentation
      Feedback</emphasis> in the subject line and reference the document name,
      page numbers, and current Version Number in the text of the
      message.</para>

      <para>LexisNexis and the Knowledge Burst logo are registered trademarks
      of Reed Elsevier Properties Inc., used under license.</para>

      <para>HPCC Systems<superscript>®</superscript> is a registered trademark
      of LexisNexis Risk Data Management Inc.</para>

      <para>Other products, logos, and services may be trademarks or
      registered trademarks of their respective companies.</para>

      <para>All names and example data used in this manual are fictitious. Any
      similarity to actual persons, living or dead, is purely
      coincidental.</para>

      <para></para>
    </legalnotice>

    <xi:include href="common/Version.xml"
                xpointer="xpointer(//*[@id='FooterInfo'])"
                xmlns:xi="http://www.w3.org/2001/XInclude" />

    <xi:include href="common/Version.xml"
                xpointer="xpointer(//*[@id='DateVer'])"
                xmlns:xi="http://www.w3.org/2001/XInclude" />

    <corpname>HPCC Systems<superscript>®</superscript></corpname>

    <xi:include href="common/Version.xml"
                xpointer="xpointer(//*[@id='Copyright'])"
                xmlns:xi="http://www.w3.org/2001/XInclude" />

    <mediaobject role="logo">
      <imageobject>
        <imagedata fileref="images/LN_Rightjustified.jpg" />
      </imageobject>
    </mediaobject>
  </bookinfo>

  <chapter id="Buildin-HPCC-from-Source">
    <title>Using Configuration Manager</title>

    <para>Configuration Manager is the utility with which we configure the
    HPCC platform. The HPCC platform's configuration is stored in an XML file
    named <emphasis role="bold">environment.xml</emphasis>. When you install a
    package, a default single-node environment.xml is generated. After that,
    you can use the Configuration Manager to modify it and add nodes and
    configure components.</para>

    <para>The Configuration Manager Wizard creates a similar file, but after
    it is generated, you must rename it and put it into place on each
    node.</para>

    <para>Configuration Manager also offers an <emphasis role="bold">Advanced
    View</emphasis> which allows you to add instances of components or change
    the default settings for components. Even if you plane to use Advanced
    View, it is a good idea to start with a wizard generated configuration and
    use Advanced View to finish it.</para>

    <para>This document will guide you through configuring an HPCC environment
    using the Configuration Manager.</para>

    <sect1 id="configuring-a-multi-node-system">
      <title>Running the Configuration Manager</title>

      <para>This document will guide you through configuring an HPCC
      environment using the Configuration Manager.</para>

      <para>The HPCC package should already be installed on ALL nodes.</para>

      <para>You can use any tool or shell script you choose.</para>

      <orderedlist>
        <listitem>
          <para>SSH to a node in your environment and login as a user with
          sudo privileges. We would suggest that it would be the first node,
          and that it is a support node, however that is up to your
          discretion.</para>
        </listitem>

        <listitem>
          <para>Start the Configuration Manager service on the node (again we
          would suggest that it should be on a support node, and further that
          you use the same node to start the Configuration Manager every time,
          but this is also entirely up to you).</para>

          <programlisting>sudo /opt/HPCCSystems/sbin/configmgr</programlisting>

          <para><graphic fileref="images/gs_img_configmgrStart.jpg" /></para>
        </listitem>

        <listitem>
          <para>Using a Web browser, go to the Configuration Manager's
          interface:</para>

          <programlisting>http://&lt;<emphasis>ip of installed system</emphasis>&gt;:8015</programlisting>

          <para>The Configuration Manager startup wizard displays.</para>
        </listitem>
      </orderedlist>

      <para>There are different ways to configure your HPCC system. You can
      use the <emphasis role="bold">Generate environment wizard</emphasis> and
      use that environment or experienced users can then use the <emphasis
      role="bold">Advanced View</emphasis> for more specific customization.
      There is also the option of using <emphasis role="bold">Create blank
      environment</emphasis> to generate an empty environment that you could
      then go in and add only the components you would want.</para>

      <sect2 id="Env_Wizard">
        <title>Environment Wizard</title>

        <orderedlist>
          <listitem>
            <?dbfo keep-together="always"?>

            <para>To use the wizard select the <emphasis role="bold">Generate
            new environment using wizard</emphasis> button.</para>

            <para><graphic fileref="images/GS_ConfigMgrWizStart.jpg"
            vendor="configmgrSS" /></para>
          </listitem>

          <listitem>
            <para>Provide a name for the environment file.</para>

            <para>This will then be the name of the configuration XML file.
            For example, we will name our environment
            <emphasis>NewEnvironment</emphasis> and this will produce a
            configuration XML file named
            <emphasis>NewEnvironment.xml</emphasis> that we will
            use.<emphasis> </emphasis></para>
          </listitem>

          <listitem>
            <para>Press the Next button.</para>

            <para>Next you will need to define the IP addresses that your HPCC
            system will be using.</para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Enter the IP addresses or hostname(s).</para>

            <para>IP Addresses can be specified individually using semi-colon
            delimiters. You can also specify a range of IPs using a hyphen
            (for example, nnn.nnn.nnn.x-y). In the image below, we specified
            the IP addresses 10.239.219.1 through 10.239.219.100 using the
            range syntax, and also a single IP 10.239.219.111. Alternatively,
            you can enter the hostnames.</para>

            <para><graphic fileref="images/GS_ConfigMgrWiz002.jpg"
            vendor="configmgrSS" /></para>
          </listitem>

          <listitem>
            <para>Press the Next button.</para>

            <para>Now you will define how many nodes to use for the Roxie and
            Thor clusters.</para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Enter the appropriate values as indicated.</para>

            <para><graphic fileref="images/GS_CMWiz003.jpg"
            vendor="configmgrSS" /></para>

            <variablelist>
              <varlistentry>
                <term>Number of support nodes:</term>

                <listitem>
                  <para>Specify the number of nodes to use for support
                  components. The default is 1.</para>
                </listitem>
              </varlistentry>

              <varlistentry>
                <term>Number of nodes for Roxie cluster:</term>

                <listitem>
                  <para>Specify the number of nodes to use for your Roxie
                  cluster. Enter zero (0) if you do not want a Roxie
                  cluster.</para>
                </listitem>
              </varlistentry>

              <varlistentry>
                <term>Number of slave nodes for Thor cluster</term>

                <listitem>
                  <para>Specify the number of slave nodes to use in your Thor
                  cluster. A Thor master node will be added automatically.
                  Enter zero (0) if you do not want any Thor slaves.</para>
                </listitem>
              </varlistentry>

              <varlistentry>
                <term>Number of Thor slaves per node (default 1)</term>

                <listitem>
                  <para>Specify the number of Thor slave processes to
                  instantiate on each slave node. Enter zero (0) if you do not
                  want a Thor cluster.</para>
                </listitem>
              </varlistentry>

              <varlistentry>
                <term>Enable Roxie on demand</term>

                <listitem>
                  <para>Specify whether or not to allow queries to be run
                  immediately on Roxie. This must be enabled to run the
                  debugger. (Default is true)</para>
                </listitem>
              </varlistentry>
            </variablelist>
          </listitem>

          <listitem>
            <para>Press the <emphasis role="bold">Next</emphasis>
            button</para>

            <para>The wizard displays the configuration parameters.</para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Press the <emphasis role="bold">Finish</emphasis> button to
            accept these values or press the <emphasis role="bold">Advanced
            View</emphasis> button to edit in advanced mode.</para>

            <graphic fileref="images/GS_ConfigMgrWiz004.jpg" />
          </listitem>
        </orderedlist>

        <para>You will now be notified that you have completed the
        wizard.</para>

        <para><graphic fileref="images/GS_ConfigMgrWiz005.jpg" /></para>

        <para>At this point, you have created a file named NewEnvironment.xml
        in the <emphasis role="bold">/etc/HPCCSystems/source</emphasis>
        directory</para>

        <informaltable colsep="1" frame="all" rowsep="1">
          <?dbfo keep-together="always"?>

          <tgroup cols="2">
            <colspec colwidth="49.50pt" />

            <colspec />

            <tbody>
              <row>
                <entry><inlinegraphic fileref="images/OSSgr3.png" /></entry>

                <entry>Keep in mind, that your HPCC configuration may be
                different depending on your needs. For example, you may not
                need a Roxie or you may need several smaller Roxie clusters.
                In addition, in a production [Thor] system, you would ensure
                that Thor and Roxie nodes are dedicated and have no other
                processes running on them. This document is intended to show
                you how to use the configuration tools. Capacity planning and
                system design is covered in a training module.</entry>
              </row>
            </tbody>
          </tgroup>
        </informaltable>

        <sect3 id="Distrib_Conf" role="brk">
          <title>Distribute the Configuration</title>

          <orderedlist>
            <listitem>
              <?dbfo keep-together="always"?>

              <para>Stop the HPCC system.</para>

              <para>If it is running stop the HPCC system (on every node),
              using a command such as this:</para>

              <para><programlisting>sudo /sbin/service hpcc-init stop</programlisting></para>

              <variablelist>
                <varlistentry>
                  <term>Note:</term>

                  <listitem>
                    <para>You may have a multi-node system and a custom script
                    such as the one illustrated in Appendix of the <emphasis
                    role="bluebold">Installing and Running the HPCC
                    Platform</emphasis> document to start and stop your
                    system. If that is the case please use the appropriate
                    command for stopping your system on every node.</para>
                  </listitem>
                </varlistentry>
              </variablelist>

              <para><informaltable colsep="1" frame="all" rowsep="1">
                  <tgroup cols="2">
                    <colspec colwidth="49.50pt" />

                    <colspec />

                    <tbody>
                      <row>
                        <entry><inlinegraphic
                        fileref="images/caution.png" /></entry>

                        <entry>Be sure HPCC is stopped before attempting to
                        copy the environment.xml file.</entry>
                      </row>
                    </tbody>
                  </tgroup>
                </informaltable></para>
            </listitem>

            <listitem>
              <para>Back up the original environment.xml file.</para>

              <programlisting># For example
sudo -u hpcc cp /etc/HPCCSystems/environment.xml /etc/HPCCSystems/source/environment-date.xml </programlisting>

              <variablelist>
                <varlistentry>
                  <term>Note:</term>

                  <listitem>
                    <para>The live environment.xml file is located in your
                    <emphasis role="bold">/etc/HPCCSystems/</emphasis>
                    directory. ConfigManager works on files in <emphasis
                    role="bold">/etc/HPCCSystems/source</emphasis> directory.
                    You must copy from this location to make an
                    environment.xml file active.</para>
                  </listitem>
                </varlistentry>
              </variablelist>

              <para>You can also choose to give the environment file a more
              descriptive name, to help differentiate any differences.</para>

              <para>Having environment files under source control is a good
              way to archive your environment settings.</para>
            </listitem>

            <listitem>
              <para>Copy the new .xml file from the source directory to the
              /etc/HPCCSystems and rename the file to
              <emphasis>environment.xml</emphasis></para>

              <programlisting># for example
sudo -u hpcc cp /etc/HPCCSystems/source/NewEnvironment.xml /etc/HPCCSystems/environment.xml</programlisting>

              <para></para>
            </listitem>

            <listitem>
              <para>Copy the <emphasis
              role="bold">/etc/HPCCSystems/environment.xml</emphasis> to the
              <emphasis role="bold">/etc/HPCCSystems/</emphasis> on to
              <emphasis>every</emphasis> node.</para>

              <para>You may want to use a script to push out the XML file to
              all nodes. See the <emphasis>Example Scripts</emphasis> section
              in the Appendix of the <emphasis role="bluebold">Installing and
              Running the HPCC Platform</emphasis> document. You can use the
              scripts as a model to create your own script to copy the
              environment.xml file out to all your nodes.</para>
            </listitem>

            <listitem>
              <para>Restart the HPCC platform on all nodes.</para>
            </listitem>
          </orderedlist>
        </sect3>
      </sect2>
    </sect1>
  </chapter>

  <chapter>
    <title>Configuration Manager Advanced View</title>

    <para>For the advanced user, the Advanced View offers access to adding
    additional instances of components or making configuration settings for
    individual components.</para>

    <sect1 id="configuring-advanced-setup">
      <title>Using ConfigMgr in Advanced Mode</title>

      <para>This section shows some of the configuration options in Advanced
      Mode. There are a few different ways to configure your system. If you
      are not an experienced user you can use the Generate environment wizard
      discussed in the previous section. The following steps will detail the
      Advanced set up.</para>

      <orderedlist>
        <listitem>
          <para>SSH to the first box in your environment and login as a user
          with sudo privileges.</para>
        </listitem>

        <listitem>
          <para>If it is running, stop the HPCC system using this command on
          every node:</para>

          <para><programlisting>sudo /sbin/service hpcc-init stop</programlisting></para>

          <variablelist>
            <varlistentry>
              <term>Note:</term>

              <listitem>
                <para>If you have a large system with many nodes, you may want
                to use a script to perform this step. See the
                <emphasis>Example Scripts</emphasis> section in the Appendix
                of the <emphasis role="bluebold">Installing and Running the
                HPCC Platform</emphasis> document.</para>
              </listitem>
            </varlistentry>
          </variablelist>

          <para><informaltable colsep="1" frame="all" rowsep="1">
              <?dbfo keep-together="always"?>

              <tgroup cols="2">
                <colspec colwidth="49.50pt" />

                <colspec />

                <tbody>
                  <row>
                    <entry><inlinegraphic
                    fileref="images/OSSgr3.png" /></entry>

                    <entry>You can use this command to confirm HPCC processes
                    are stopped: <para><programlisting>sudo /sbin/service hpcc-init status</programlisting></para></entry>
                  </row>
                </tbody>
              </tgroup>
            </informaltable></para>
        </listitem>

        <listitem>
          <para>Start the Configuration Manager service on one node (usually
          the first node is considered the head node and is used for this
          task, but this is up to you).</para>

          <programlisting>sudo /opt/HPCCSystems/sbin/configmgr</programlisting>

          <para><graphic fileref="images/gs_img_configmgrStart.jpg" /></para>
        </listitem>

        <listitem>
          <para>Using a Web browser, go to the Configuration Manager's
          interface:</para>

          <programlisting>http://&lt;<emphasis>ip of installed system</emphasis>&gt;:8015</programlisting>

          <para>The Configuration Manager startup wizard displays.</para>
        </listitem>

        <listitem>
          <para>Select <emphasis role="bold">Advanced View</emphasis>, then
          press the <emphasis role="bold">Next </emphasis>button.</para>

          <para>There are a few different ways to configure your system. If
          you are not an experienced user you can use the Generate environment
          wizard discussed in the previous section.</para>
        </listitem>

        <listitem>
          <para>Select an XML file from the drop list.</para>

          <para>This list is populated from versions of an environment XML
          file in your server's /etc/HPCCSystems/source/ directory.</para>

          <para>The system will check the current environment file and if a
          match is found here it will highlight in blue the current
          environment file being used.</para>
        </listitem>

        <listitem>
          <?dbfo keep-together="always"?>

          <para>Press the <emphasis role="bold">Next</emphasis> button.
          <graphic fileref="images/CM-WizStart.jpg"
          vendor="configmgrSS" /></para>
        </listitem>

        <listitem>
          <para>The Configuration Manager interface displays.</para>

          <para><informaltable colsep="1" frame="all" rowsep="1">
              <?dbfo keep-together="always"?>

              <tgroup cols="2">
                <colspec colwidth="49.50pt" />

                <colspec />

                <tbody>
                  <row>
                    <entry><inlinegraphic
                    fileref="images/OSSgr3.png" /></entry>

                    <entry>Default access is read-only. Many options are only
                    available when write-access is enabled. <para>Gain write
                    access by checking the <emphasis role="bold">Write
                    Access</emphasis> checkbox. </para><para>Unchecking this
                    box returns the environment to read-only mode. All menu
                    items are disabled in read-only mode. </para><para>Closing
                    the web page automatically removes any write-access
                    locks.</para></entry>
                  </row>
                </tbody>
              </tgroup>
            </informaltable></para>
        </listitem>

        <listitem>
          <para>Check the <emphasis role="bold">Write Access</emphasis>
          box.</para>

          <para><graphic fileref="images/CM-img101.jpg"
          vendor="configmgrSS" />The <emphasis role="bold">Save</emphasis>
          button<inlinegraphic fileref="images/GS-img01c.png"
          vendor="configmgrSS" /> validates and saves the environment.</para>

          <para>The <emphasis role="bold">Save Environment As</emphasis>
          button <inlinegraphic fileref="images/CM-img181.jpg"
          vendor="configmgrSS" /> validates and lets you specify the
          environment filename to save.</para>

          <para>The <emphasis role="bold">Validate Environment</emphasis>
          button<inlinegraphic fileref="images/GS-img01d.png"
          vendor="configmgrSS" /> just validates the current environment
          including any changes that have not yet been saved.</para>

          <para>The <emphasis role="bold">Open Environment</emphasis> button
          <inlinegraphic fileref="images/CM-img18.jpg" vendor="configmgrSS" />
          allows you to open a new environment file to work on.</para>

          <para>The <emphasis role="bold">Wizard</emphasis> button
          <inlinegraphic fileref="images/CM-img19.jpg" vendor="configmgrSS" />
          will bring up the Configuration Manager chooser form which will
          allow you to create or view an environment file where you can also
          launch the configuration wizard.</para>

          <para>These buttons are only enabled in Write Access mode.</para>
        </listitem>
      </orderedlist>

      <sect2 role="brk">
        <title>XML View</title>

        <para>In the advanced view of Configuration Manager, you can
        optionally choose to work with the XML View.</para>

        <para>To see the the configuration in XML View, click on the
        Environment heading in the Navigator panel on the left side.</para>

        <para><graphic fileref="images/CM-120.jpg" />You can access all
        attributes through the XML view.</para>

        <para>If you wish to add an attribute that does not exist, right-click
        on one of the components then you can choose to add an
        attribute.</para>

        <para><graphic fileref="images/CM-121.jpg" /></para>
      </sect2>
    </sect1>

    <sect1 role="brk">
      <title>Hardware Section</title>

      <para>This section allows you to define your list of servers. When
      defining instances of components, you will choose from servers in this
      list.</para>

      <orderedlist>
        <listitem>
          <?dbfo keep-together="always"?>

          <para>Select <emphasis role="bold">Hardware</emphasis> in the
          Navigator panel on the left side.</para>

          <para><graphic fileref="images/CM-img01.jpg"
          vendor="configmgrSS" /></para>
        </listitem>

        <listitem>
          <para>Select the <emphasis role="bold">Computers</emphasis>
          tab.</para>
        </listitem>

        <listitem>
          <?dbfo keep-together="always"?>

          <para>right-click on one of computers listed, then select New
          Range.</para>

          <para><graphic fileref="images/CM-img02.jpg"
          vendor="configmgrSS" /></para>
        </listitem>

        <listitem>
          <para>Specify the following:</para>

          <itemizedlist>
            <listitem>
              <para>Name Prefix - any name that will help you to identify the
              node or range</para>
            </listitem>

            <listitem>
              <para>Start IP Address</para>
            </listitem>

            <listitem>
              <para>Stop IP Address</para>

              <para>The IP Addresses can be specified in a range if all your
              host IP addresses are consecutively numbered. If the IP
              addresses are not sequential you should repeat the process for
              each individual IP address and just add the IP address in both
              the start and stop IP address field. You will then need to
              repeat the process for each node.</para>
            </listitem>
          </itemizedlist>
        </listitem>

        <listitem>
          <?dbfo keep-together="always"?>

          <para>Press the <emphasis role="bold">OK</emphasis> button.</para>

          <para>The list of nodes now displays with the nodes that you just
          added.</para>

          <para><inlinegraphic fileref="images/CM-img03.jpg"
          vendor="configmgrSS" /></para>

          <para>Next, edit each System Server component instance and set it to
          a newly defined node.</para>

          <!--***The steps that follow are using one component per node. You can allocate more components per node, if needed.-->
        </listitem>

        <listitem>
          <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
          disk icon to save</para>
        </listitem>

        <listitem>
          <para>Expand the <emphasis role="bold">Software</emphasis> section,
          if necessary, in the Navigator panel on the left side, by clicking
          on the <inlinegraphic fileref="images/expandButton.png" />
          button.</para>
        </listitem>
      </orderedlist>
    </sect1>

    <sect1>
      <title>Software Section</title>

      <para>Use the software components section to configure software
      components of the HPCC platform. Most software components are actual
      running processes; however, some are just definitions used by the
      system. These definitions are used by the configuration
      generator.</para>

      <para>Items that appear in <emphasis role="red">red</emphasis> indicate
      optional values. They are only written to the environment if you add to
      or change that value. If untouched, they will not appear in the
      environment XML file.</para>

      <sect2 role="brk">
        <title>Dali</title>

        <sect3>
          <title>Instances</title>

          <para>
            <orderedlist>
              <listitem>
                <para>Select <emphasis role="bold">Dali Server</emphasis> in
                the Navigator panel on the left side.</para>
              </listitem>

              <listitem>
                <para>Select the Instances tab.</para>
              </listitem>

              <listitem>
                <?dbfo keep-together="always"?>

                <para>In the computer column, choose a node from the drop list
                as shown below:<graphic fileref="images/CM-img04.jpg"
                vendor="configmgrSS" /></para>
              </listitem>

              <listitem>
                <para>Click the <inlinegraphic
                fileref="images/GS-img01c.png" /> disk icon to save</para>
              </listitem>
            </orderedlist>
          </para>
        </sect3>

        <sect3 role="brk">
          <title>DaliServer attributes</title>

          <para>This section describes the DaliServer attributes.</para>

          <para>
            <graphic fileref="images/CM-img04-1.jpg" vendor="configmgrSS" />
          </para>

          <para />

          <!--configMgr-Dali-Server-Include-XXX1-->

          <para>
            <xi:include href="XMLGeneration/xml/dali.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='da.t1'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>DaliServer store</title>

          <para>This section describes the attributes configuring how Dali
          handles the system data store.</para>

          <para>
            <graphic fileref="images/CM-img04-2.jpg" vendor="configmgrSS" />
          </para>

          <para />

          <!--configMgr-Dali-Server-Include-XXX2-->

          <para>
            <xi:include href="XMLGeneration/xml/dali.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='da.t2'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>DaliServer LDAP options</title>

          <para>This section describes the DaliServer LDAP tab.</para>

          <para>
            <graphic fileref="images/CM-img04-4.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-DaliServer-LDAP-Include-XXX3-->

          <para>
            <xi:include href="XMLGeneration/xml/dali.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='da.t4'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>DaliServer Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="Dafilesrv-Process" role="brk">
        <title>Dafilesrv Process</title>

        <sect3>
          <title>Dafilesrv Instances</title>

          <para>Dafilesrv is a helper process that every node needs.</para>

          <orderedlist>
            <listitem>
              <para>Select Dafilesrv in the Navigator panel on the left
              side.</para>
            </listitem>

            <listitem>
              <para>Select the Instances tab.</para>
            </listitem>

            <listitem>
              <para>right-click on a computer in the computer column, and
              select Add Instance .</para>
            </listitem>

            <listitem>
              <?dbfo keep-together="always"?>

              <para>Select all computers in the list by checking the <emphasis
              role="bold">Select All</emphasis> box, then press the <emphasis
              role="bold">OK</emphasis> button.</para>

              <para>
                <graphic fileref="images/CM-img12.jpg" vendor="configmgrSS" />
              </para>
            </listitem>

            <listitem>
              <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
              disk icon to save</para>
            </listitem>
          </orderedlist>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>Dafilesrv attributes</title>

          <para>This section describes the Dafilesrv attributes.</para>

          <para>
            <graphic fileref="images/CM-img12-1.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-DaFileSrv-Include-XXX4-->

          <para>
            <xi:include href="XMLGeneration/xml/dafilesrv.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='daFs.t'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>
      </sect2>

      <sect2 id="DFU-Server" role="brk">
        <title>DFU Server</title>

        <sect3>
          <title>DfuServer Instances</title>

          <orderedlist>
            <listitem>
              <para>Select <emphasis role="bold">DFU Server</emphasis> in the
              Navigator panel on the left side.</para>
            </listitem>

            <listitem>
              <para>Select the Instances tab.</para>
            </listitem>

            <listitem>
              <para>In the computer column, choose a node from the drop list
              as shown below:<graphic fileref="images/CM-img05.jpg"
              vendor="configmgrSS" /></para>
            </listitem>

            <listitem>
              <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
              disk icon to save</para>
            </listitem>
          </orderedlist>
        </sect3>

        <sect3 role="brk">
          <title>DfuServer Attributes Tab</title>

          <para>This section describes the DfuServer attributes.</para>

          <para>
            <graphic fileref="images/CM-img05-1.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-DFUSrvr-Attr-Include-XXX6-->

          <para>
            <xi:include href="XMLGeneration/xml/dfuserver.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='DF.t1'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3 role="brk">
          <title>DfuServer SSH Options</title>

          <para>This section describes the DfuServer SSH Options..</para>

          <para>
            <graphic fileref="images/CM-img05-2.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-DFUSrvr-SSH-Include-XXX7-->

          <para>
            <xi:include href="XMLGeneration/xml/dfuserver.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='DF.t2'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>DfuServer Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 role="brk">
        <title>Directories</title>

        <para>The Directories component is a global definition used by other
        components to determine the directories they will use for various
        functions.</para>

        <para>
          <graphic fileref="images/CM-161a.jpg" vendor="configmgrSS" />
        </para>

        <para />

        <informaltable colsep="1" frame="all" rowsep="1">
          <tgroup cols="3">
            <colspec align="left" colwidth="122.40pt" />

            <tbody>
              <row>
                <entry>Name</entry>

                <entry>Directory</entry>

                <entry>Description</entry>
              </row>

              <row>
                <entry>
                  <emphasis role="bold">log</emphasis>
                </entry>

                <entry>/var/log/[NAME]/[INST]</entry>

                <entry>Location for Log files</entry>
              </row>

              <row>
                <entry>
                  <emphasis role="bold">temp</emphasis>
                </entry>

                <entry>/var/lib/[NAME]/[INST]/temp</entry>

                <entry>Location for temp files</entry>
              </row>

              <row>
                <entry>
                  <emphasis role="bold">data</emphasis>
                </entry>

                <entry />

                <entry>Base Location for data files</entry>
              </row>

              <row>
                <entry>
                  <emphasis role="bold">data2</emphasis>
                </entry>

                <entry />

                <entry>Base Location for 2nd copy of roxie data</entry>
              </row>

              <row>
                <entry>
                  <emphasis role="bold">data3</emphasis>
                </entry>

                <entry />

                <entry>Reserved for future use</entry>
              </row>

              <row>
                <entry>
                  <emphasis role="bold">mirror</emphasis>
                </entry>

                <entry />

                <entry>Base Location for mirror data files</entry>
              </row>

              <row>
                <entry>
                  <emphasis role="bold">query</emphasis>
                </entry>

                <entry />

                <entry>Base Location for Queries</entry>
              </row>
            </tbody>
          </tgroup>
        </informaltable>
      </sect2>

      <sect2 id="Drop-Zone" role="brk">
        <title>Drop Zone</title>

        <sect3>
          <title>DropZone Attributes</title>

          <orderedlist>
            <listitem>
              <para>Select Drop Zone in the Navigator panel on the left
              side.</para>
            </listitem>

            <listitem>
              <para>Select the Attributes tab.</para>
            </listitem>

            <listitem>
              <para>In the Value column of the Computer row, choose a node
              from the drop list as shown below:<graphic
              fileref="images/CM-img06.jpg" vendor="configmgrSS" /></para>
            </listitem>

            <listitem>
              <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
              disk icon to save</para>
            </listitem>
          </orderedlist>
        </sect3>

        <sect3>
          <title>DropZone Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="ECL-Agent" role="brk">
        <title>ECL Agent</title>

        <sect3>
          <title>instances</title>

          <orderedlist>
            <listitem>
              <para>Select ECL Agent in the Navigator panel on the left
              side.</para>
            </listitem>

            <listitem>
              <para>Select the Instances tab.</para>
            </listitem>

            <listitem>
              <para>In the computer column, choose a node from the drop list
              as shown below:<graphic fileref="images/CM-img07.jpg"
              vendor="configmgrSS" /></para>
            </listitem>

            <listitem>
              <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
              disk icon to save</para>
            </listitem>
          </orderedlist>
        </sect3>

        <sect3 role="brk">
          <title>EclAgent Attributes Tab</title>

          <para>This section describes the EclAgent Attributes tab.</para>

          <para>
            <graphic fileref="images/CM-img07-1.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-ECLAgent-Attr-Include-XXX8-->

          <para>
            <xi:include href="XMLGeneration/xml/eclagent_config.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='EA.t1'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3 role="brk">
          <title>EclAgent Options Tab</title>

          <para>This section describes the EclAgent Options tab.</para>

          <para>
            <graphic fileref="images/CM-img07-2.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-ECLAgent-Options-Include-XXX9-->

          <para>
            <xi:include href="XMLGeneration/xml/eclagent_config.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='EA.t2'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>EclAgentProcessNotes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 role="brk">
        <title>ECL CC Server Process</title>

        <sect3>
          <title>Ecl CC Server Instances</title>

          <para>
            <orderedlist>
              <listitem>
                <para>Select Ecl CC Server - myeclccserver in the Navigator
                panel on the left side.</para>
              </listitem>

              <listitem>
                <para>Select the Instances tab.</para>
              </listitem>

              <listitem>
                <para>In the computer column, choose a node from the drop list
                as shown below:<graphic fileref="images/CM-ECLCC-01.jpg"
                vendor="configmgrSS" /></para>
              </listitem>

              <listitem>
                <para>Click the <inlinegraphic
                fileref="images/GS-img01c.png" /> disk icon to save</para>
              </listitem>
            </orderedlist>
          </para>
        </sect3>

        <sect3 role="brk">
          <title>Ecl CC Server Attributes Tab</title>

          <para>This section describes the Ecl CC Server Attributes
          tab.</para>

          <para>
            <graphic fileref="images/CM-ECLCC-02.jpg" vendor="configmgrSS" />
          </para>

          <!--ECLCCServer-Include-cc.t2-XXX-X-->

          <para>
            <xi:include href="XMLGeneration/xml/eclccserver.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='cc.t2'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>EclCC Server Process Options</title>

          <para>To add a custom option, right-click and select add. These
          options are passed to the eclcc compiler.</para>

          <para>See the ECL Compiler chapter in the <emphasis
          role="bluebold">Client Tools</emphasis> manual for details.</para>

          <!--This feature allows the user to configure any options pertinent to the Ecl CC Server Process -->

          <para />
        </sect3>

        <sect3>
          <title>EclCC Server Process Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="ECL-Scheduler" role="brk">
        <title>ECL Scheduler</title>

        <sect3>
          <title>instances</title>

          <orderedlist>
            <listitem>
              <para>Select <emphasis role="bold">ECL Scheduler</emphasis> in
              the Navigator panel on the left side.</para>
            </listitem>

            <listitem>
              <para>Select the Instances tab.</para>
            </listitem>

            <listitem>
              <para>In the computer column, choose a node from the drop list
              as shown below:<graphic fileref="images/CM-161.jpg"
              vendor="configmgrSS" /></para>
            </listitem>

            <listitem>
              <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
              disk icon to save</para>
            </listitem>
          </orderedlist>
        </sect3>

        <sect3 role="brk">
          <title>EclScheduler Attributes Tab</title>

          <para>This section describes the EclScheduler Attributes tab.</para>

          <para>
            <graphic fileref="images/CM-160.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-DaliServer-LDAP-Include-XXX-XI-->

          <para>
            <xi:include href="XMLGeneration/xml/eclscheduler.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='ecl.sched'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>EclScheduler Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="ESP-Server" role="brk">
        <title>ESP Server</title>

        <sect3>
          <title>Esp Process Instances</title>

          <orderedlist>
            <listitem>
              <para>Select <emphasis role="bold">ESP - myesp</emphasis> in the
              Navigator panel on the left side.</para>
            </listitem>

            <listitem>
              <para>Select the Instances tab.</para>
            </listitem>

            <listitem>
              <para>In the computer column, choose a node from the drop list
              as shown below:<graphic fileref="images/CM-img08.jpg"
              vendor="configmgrSS" /></para>
            </listitem>

            <listitem>
              <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
              disk icon to save</para>
            </listitem>
          </orderedlist>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>Esp - myesp Attributes Tab</title>

          <para>This section describes the Esp - myesp Attributes tab.</para>

          <para>
            <graphic fileref="images/CM-img08-1.jpg" vendor="configmgrSS" />
          </para>

          <!--MyESP-Include-ESP.t6-XXX12-->

          <para>
            <xi:include href="XMLGeneration/xml/esp.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='ESP.t6'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3 role="brk">
          <title>Esp - myesp Service BindingsTab</title>

          <para>This section describes the Esp - myesp Service Bindings tab.
          This tab requires additional steps to configure the service
          bindings.</para>

          <para>
            <graphic fileref="images/CM-img08-2.jpg" vendor="configmgrSS" />
          </para>

          <para>You must first add the service bindings in the first table
          (Right-click, add). Then you would configure the attributes in the
          other tables on that tab. The next table describes the <emphasis
          role="bold">URL Authentication</emphasis> table.</para>

          <!--MyESP-Include-ESP.t1-XXXIII-->

          <para>
            <xi:include href="XMLGeneration/xml/esp.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='ESP.t1'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>

          <para>The following tables describe the ESPProcess Service Bindings,
          <emphasis role="bold">Feature Authentications</emphasis>.</para>

          <!--MyESP-Include-ES.t2-XXX-14-->

          <para>
            <xi:include href="XMLGeneration/xml/esp.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='ESP.t2'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>

          <para>
            <!--MyESP-Include-ES.t3-XXX-15-->

            <!-- <xi:include href="XMLGeneration/xml/esp.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='ES.t3'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />  -->
          </para>

          <para />
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>Esp - myesp AuthenticationTab</title>

          <para>This section describes the Esp - myesp Service Authentication
          tab.</para>

          <para>
            <graphic fileref="images/CM-img08-3.jpg" vendor="configmgrSS" />
          </para>

          <!--MyESP-Authentication-ES.t4-XXX-16-->

          <para>
            <xi:include href="XMLGeneration/xml/esp.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='ESP.t4'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>

          <para>Additional information about the available Authentication
          methods:</para>

          <para>
            <informaltable colsep="1" frame="all" rowsep="1">
              <tgroup cols="2">
                <colspec colwidth="111.50pt" />

                <colspec />

                <tbody>
                  <row>
                    <entry>none</entry>

                    <entry>uses no authentication</entry>
                  </row>

                  <row>
                    <entry>local</entry>

                    <entry>uses the local credentials for the server running
                    the ESP</entry>
                  </row>

                  <row>
                    <entry>ldap</entry>

                    <entry>uses Lightweight Directory Access Protocol for
                    authentication</entry>
                  </row>

                  <row>
                    <entry>ldaps</entry>

                    <entry>similar to LDAP but uses a more secure (TLS)
                    protocol</entry>
                  </row>

                  <row>
                    <entry>secmgrPlugin</entry>

                    <entry>uses the security manager plug-in</entry>
                  </row>
                </tbody>
              </tgroup>
            </informaltable>
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>Esp - myesp HTTPS Tab</title>

          <para>This section describes the Esp - myesp HTTPS tab.</para>

          <para>
            <graphic fileref="images/CM-img08-4.jpg" vendor="configmgrSS" />
          </para>

          <para>The <emphasis role="bold">cipherList</emphasis> attribute
          allows you to set the ordered list of available ciphers for use by
          openssl. See the documentation at openssl.org for more information
          about ciphers.</para>

          <!--MyESP-HTTPS.t5-XXX-17-->

          <para>
            <xi:include href="XMLGeneration/xml/esp.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='ESP.t5'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>EspProcess Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="ESP_Services" role="brk">
        <title>ESP Services</title>

        <para>ESP Services provide a means to add functionality to an ESP
        Server.</para>

        <sect3 id="CfgMgrEclWatch">
          <title>ECL Watch Service</title>

          <para>Ecl Watch allows you to configure options for the ECL Watch
          utility.</para>

          <para>
            <graphic fileref="images/CM-009.jpg" vendor="configmgrSS" />
          </para>

          <para>ECL Watch Attribute definitions.</para>

          <!--ECLWa-Include-TBLZ-1-->

          <para>
            <xi:include href="XMLGeneration/xml/espsmcservice.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='SMC-T01'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>

          <para>ECL Watch Monitoring attributes.</para>

          <!--ECLWa-Include-TBLZ-2-->

          <para>
            <xi:include href="XMLGeneration/xml/espsmcservice.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='SMC-T02'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3 id="cfgmgr_WsECL" role="brk">
          <title>WsECL Service</title>

          <para>The WsECL service allows you to configure options for the
          WsECL utility.</para>

          <para>
            <graphic fileref="images/CM-010.jpg" vendor="configmgrSS" />
          </para>

          <para>The Ws ECL configuration attributes.</para>

          <!--WsECL-Include-ZXX-1-->

          <para>
            <xi:include href="XMLGeneration/xml/esp_service_wsecl2.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='MyWS2-T01'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>

          <para>Ws ECL VIPS option attributes.</para>

          <!--WsECL-Include-ZXX-2-->

          <para>
            <xi:include href="XMLGeneration/xml/esp_service_wsecl2.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='MyWS2-T02'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>

          <para>Ws ECL Target Restrictions table.</para>

          <!--WsECL-Include-ZXX-3-->

          <para>
            <xi:include href="XMLGeneration/xml/esp_service_wsecl2.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='MyWS2-T03'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>
      </sect2>

      <sect2 id="FTSlave-Process" role="brk">
        <title>FTSlave Process</title>

        <para>FTSlave is a helper process that every node needs. This section
        depicts an FTSlave installation.</para>

        <sect3>
          <title>Instances</title>

          <orderedlist>
            <listitem>
              <para>Select FTSlave in the Navigator panel on the left
              side.</para>
            </listitem>

            <listitem>
              <para>Select the Instances tab.</para>
            </listitem>

            <listitem>
              <?dbfo keep-together="always"?>

              <para>right-click on a computer in the computer column, and
              select Add Instance.</para>

              <para>
                <graphic fileref="images/CM-190.jpg" vendor="configmgrSS" />
              </para>
            </listitem>

            <listitem>
              <?dbfo keep-together="always"?>

              <para>Select all computers in the list, then press the <emphasis
              role="bold">OK</emphasis> button.</para>

              <para>
                <graphic fileref="images/CM-112-4.jpg" vendor="configmgrSS" />
              </para>
            </listitem>

            <listitem>
              <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
              disk icon to save</para>
            </listitem>
          </orderedlist>
        </sect3>

        <sect3>
          <title>FtSlave attributes</title>

          <para>This section describes an FTSlaveProcess attributes
          tab.</para>

          <!--FTSlave-Include-XXX-18-->

          <para>
            <xi:include href="XMLGeneration/xml/ftslave_linux.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='FTS.t1'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>FtSlave Process Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="LDAPServer_Process" role="brk">
        <title>LDAP Server Process</title>

        <para>This section describes the configuration attributes of an
        LDAPServer Installation in ConfigManager. For a complete description
        of how to add LDAP Authentication see <emphasis>Using LDAP
        Authentication</emphasis> section in the <emphasis
        role="bluebold">Installing and Running The HPCC Platform</emphasis>
        document.</para>

        <para>
          <graphic fileref="images/LDAP_004.jpg" />
        </para>

        <!--LdapServer-Include-fullDoc-XXX-19-->

        <xi:include href="XMLGeneration/xml/ldapserver.xsd.mod.xml"
                    xpointer="xpointer(//*[@id='ldapSrv'])"
                    xmlns:xi="http://www.w3.org/2001/XInclude" />

        <sect3>
          <title>LDAP Server Process Instances</title>

          <para>This tab allows you to add instances to your LDAP
          Configuration. In order to add instances you would have previously
          added the LDAP computers in the Hardware section. For a complete
          description of how to add LDAP Authentication see <emphasis>Using
          LDAP Authentication</emphasis> section in the <emphasis
          role="bluebold">Installing and Running The HPCC Platform</emphasis>
          document.</para>

          <orderedlist>
            <listitem>
              <para>On the <emphasis role="bold">Instances</emphasis> tab,
              right-click on the table on the right hand side, choose
              <emphasis role="bold">Add Instances...</emphasis></para>
            </listitem>

            <listitem>
              <para>Select the computer to use by checking the box next to
              it.</para>

              <para>This is the computer you added in the <emphasis
              role="bold">Hardware</emphasis> / <emphasis role="bold">Add New
              Computers</emphasis> portion earlier.</para>
            </listitem>
          </orderedlist>
        </sect3>

        <sect3>
          <title>LDAP Server Process Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 role="brk">
        <title>Sasha Server</title>

        <sect3>
          <title>Instances</title>

          <orderedlist>
            <listitem>
              <para>Select Sasha Server in the menu on the left side.</para>
            </listitem>

            <listitem>
              <para>Select the Instances tab.</para>
            </listitem>

            <listitem>
              <para>In the computer column, choose a node from the drop list
              as shown below:</para>
            </listitem>
          </orderedlist>

          <graphic fileref="images/CM-img17.jpg" vendor="configmgrSS" />
        </sect3>

        <sect3 role="brk">
          <title>Sasha Server Attributes</title>

          <!--***Might-Want-to-add-CM-Sasha17A.jpg-image-***-->

          <para>This section described the SashaServerProcess <emphasis
          role="bold">Attribute</emphasis> tab values.</para>

          <graphic fileref="images/CM-Sasha17A.jpg" vendor="configmgrSS" />

          <!--configMgr-Sasha-t1-Include-XXX-20-->

          <para>
            <xi:include href="XMLGeneration/xml/sasha.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='sh.t1'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>SashaServer Process Archiver</title>

          <para>This section describes the SashaServer Process Archiver
          tab.</para>

          <para>
            <graphic fileref="images/CM-img17-1.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-Sasha-Archiver-Include-XXX-21-->

          <para>
            <xi:include href="XMLGeneration/xml/sasha.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='sh.t2'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>

          <para />
        </sect3>

        <sect3 role="brk">
          <title>SashaServer Process Coalescer</title>

          <para>This section describes the SashaServer Process Coalescer
          tab.</para>

          <para>
            <graphic fileref="images/CM-img17-2.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-Sasha-Coaleser-Include-XXX-22-->

          <para>
            <xi:include href="XMLGeneration/xml/sasha.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='sh.t3'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>SashaServer Process DfuXRef</title>

          <para>This section describes the SashaServer Process DfuXref
          tab.</para>

          <para>
            <graphic fileref="images/CM-img17-3.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-Sasha-DfuXref-Include-XXX-23-->

          <para>
            <xi:include href="XMLGeneration/xml/sasha.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='sh.t4'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>SashaServer Process DfuExpiry</title>

          <para>This section describes the SashaServer Process DfuExpiry
          tab.</para>

          <para>
            <graphic fileref="images/CM-img17-4.jpg" vendor="configmgrSS" />
          </para>

          <para />

          <!--configMgr-Sasha-DfuExpiry-Include-XXX-24-->

          <para>
            <xi:include href="XMLGeneration/xml/sasha.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='sh.t5'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>SashaServer Process ThorQMon</title>

          <para>This section describes the SashaServer Process ThorQMon
          tab.</para>

          <para>
            <graphic fileref="images/CM-img17-5.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-Sasha-ThorQMon-IncludeXXX-25-->

          <para>
            <xi:include href="XMLGeneration/xml/sasha.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='sh.t6'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>SashaServer Process DaFileSrvMonitor</title>

          <para>This section describes the SashaServer Process
          DaFileSrvMonitor tab.</para>

          <para>
            <graphic fileref="images/CM-img17-6.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-Sasha-DafiSrvMon-Include-XXX26-->

          <para>
            <xi:include href="XMLGeneration/xml/sasha.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='sh.t7'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>SashaServer Process Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="Thor" role="brk">
        <title>Thor</title>

        <para>This section details how to define a Data Refinery (Thor)
        cluster. Before you begin, you should decide the width of the cluster
        (i.e., how many slave nodes will you have).</para>

        <orderedlist>
          <listitem>
            <para>Select <emphasis role="bold">Thor Cluster -
            mythor</emphasis> in the Navigator panel on the left side.</para>
          </listitem>

          <listitem>
            <para>Select the <emphasis role="bold">Topology</emphasis>
            tab.</para>
          </listitem>

          <listitem>
            <para>Expand the Topology, if needed, then right-click the Master
            and select Delete.</para>
          </listitem>
        </orderedlist>

        <para>This deletes the sample one-node Thor.</para>

        <para>You will replace this with a multi-node cluster.</para>

        <orderedlist>
          <listitem>
            <?dbfo keep-together="always"?>

            <para>right-click on the Topology and select Add Master.</para>

            <para>
              <graphic fileref="images/CM-img13.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Select a computer from the list, then press the OK
            button.</para>

            <para>
              <graphic fileref="images/CM-112-5.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Right-click on the Master and select Add Slaves.</para>

            <para>
              <graphic fileref="images/CM-111.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Select the computers to use as slaves from the list, then
            press the OK button. Use CTRL+CLICK to multi-select or SHIFT+CLICK
            to select a range.</para>

            <para><graphic fileref="images/CM-112-3.jpg"
            vendor="configmgrSS" />The Nodes now display below the Thor Master
            node.</para>

            <para>
              <graphic fileref="images/CM-img14.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <para>Select Thor Cluster - mythor in the Navigator panel on the
            left side.</para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Select the Attributes tab.</para>

            <para>
              <graphic fileref="images/CM-img15.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <para>Change the value of the localThor to <emphasis
            role="bold">false</emphasis></para>
          </listitem>

          <listitem>
            <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
            disk icon to save</para>
          </listitem>
        </orderedlist>

        <?hard-pagebreak ?>

        <sect3>
          <title>Changing Thor topology</title>

          <para>If you want to designate a different node as the Thor master
          when setting up a multi-node system, follow these steps.</para>

          <orderedlist>
            <listitem>
              <para>Select <emphasis role="bold">Thor Cluster -
              mythor</emphasis> in the Navigator panel on the left
              side.</para>
            </listitem>

            <listitem>
              <para>Select the <emphasis role="bold">Topology</emphasis>
              tab.</para>
            </listitem>

            <listitem>
              <para>right-click on the Master node</para>
            </listitem>

            <listitem>
              <?dbfo keep-together="always"?>

              <para>Select the <emphasis role="bold">Replace Master</emphasis>
              option.</para>

              <para>
                <graphic fileref="images/CM-111-2.jpg" vendor="configmgrSS" />
              </para>

              <para>
                <informaltable colsep="1" frame="all" rowsep="1">
                  <?dbfo keep-together="always"?>

                  <tgroup cols="2">
                    <colspec colwidth="49.50pt" />

                    <colspec />

                    <tbody>
                      <row>
                        <entry>
                          <inlinegraphic fileref="images/caution.png" />
                        </entry>

                        <entry>You should only use this feature when initially
                        setting up your system. If there is data on the nodes
                        when attempting to Swap Master, you run the risk of
                        losing or corrupting some data.</entry>
                      </row>
                    </tbody>
                  </tgroup>
                </informaltable>
              </para>
            </listitem>
          </orderedlist>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>ThorCluster Attributes</title>

          <para>This section describes the Thor Cluster Attributes tab.</para>

          <para>
            <graphic fileref="images/CM-img18-1.jpg" vendor="configmgrSS" />
          </para>

          <para>
            <emphasis role="bold">Thor Memory Settings</emphasis>
          </para>

          <para>If <emphasis role="bold">globalMemorySize</emphasis> is left
          unset, Thor[master] detects total physical memory and allocates 75%
          of it. If there are multiple slaves per node (slavesPerNode&gt;1) it
          divides the total among the slaves. If globalMemorySize is defined,
          then it allocates that amount of memory to each slave. The
          masterMemorySize attribute allocates memory for the Thor master. If
          omitted, Thor master uses globalMemorySize, or the default 75% of
          memory.</para>

          <para>On systems with a lot of memory, the default 75% of physical
          memory is probably too conservative and reserving total physical
          minus 2GB (for the OS and other processes) is sensible. You should
          then divide that number by the number of slavesPerNode.</para>

          <para>If there are multiple Thors sharing the same nodes, then
          globalMemorySize must be configured to take that into
          account.</para>

          <para>For example, if there are 2 Thors each with 2 slaves per box,
          that will mean there are 4 slaves per physical node. So you should
          use a formula similar to the following in your calculations when
          configuring globalMemorySize:</para>

          <programlisting>globalMemorySize = (total-physical-memory)-2GB / (2*2) </programlisting>

          <para>Without any specified setting, Thor assumes it has exclusive
          access to the memory and would therefore use too much (because each
          Thor is unaware of the other's configuration and memory
          usage).</para>

          <para>if <emphasis role="bold">localThor</emphasis> is set to true
          and <emphasis role="bold">masterMemorySize</emphasis> and <emphasis
          role="bold">globalMemorySize</emphasis> are unspecified, then the
          defaults will be 50% for <emphasis
          role="bold">globalMemorySize</emphasis> (divided by <emphasis
          role="bold">slavesPerNode</emphasis>) and 25% for <emphasis
          role="bold">masterMemorySize.</emphasis></para>

          <para>Although a configuration may be set using upper memory limits
          that exceed total physical memory, Thor will not actually reserve
          the memory ahead of time and will only hit memory problems when and
          if your jobs use all of memory. So, for example, two Thors that are
          configured to use all available memory could peacefully co-exist
          until a query on each are simultaneously using more memory than the
          node has available.</para>

          <!--configMgr-Thor-Attribute-Include-XXX-->

          <para>
            <xi:include href="XMLGeneration/xml/thor.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='Th.t1'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>ThorCluster SSH Options</title>

          <para>This section describes the ThorCluster SSH Options tab.</para>

          <para>
            <graphic fileref="images/CM-img18-2.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-Thor-SSH-Include-XXX-->

          <para>
            <xi:include href="XMLGeneration/xml/thor.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='Th.t3'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <sect3>
          <title>ThorCluster Debug</title>

          <para>The debug tab is for internal use only</para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>ThorCluster Swap Node</title>

          <para>This section describes the ThorCluster Swap Node tab.</para>

          <para>
            <graphic fileref="images/CM-img18-4.jpg" vendor="configmgrSS" />
          </para>

          <!--configMgr-Thor-SwapNode-Include-XXX-->

          <para>
            <xi:include href="XMLGeneration/xml/thor.xsd.mod.xml"
                        xpointer="xpointer(//*[@id='Th.t4'])"
                        xmlns:xi="http://www.w3.org/2001/XInclude" />
          </para>
        </sect3>

        <?hard-pagebreak ?>

        <sect3>
          <title>ThorCluster Notes</title>

          <para>This tab allows you to add any notes pertinent to the
          component's configuration. This can be useful to keep a record of
          changes and to communicate this information to peers.</para>
        </sect3>
      </sect2>

      <sect2 id="Roxie" role="brk">
        <title>Roxie</title>

        <para>This section details how to define a Rapid Data Delivery Engine
        (Roxie) cluster. Before you begin, you should decide the width of the
        cluster (i.e., how many agent nodes will you have).</para>

        <!--***This section appears to have had signifcent changes*** -->

        <orderedlist>
          <listitem>
            <para>Select <emphasis role="bold">Roxie Cluster</emphasis> in the
            Navigator panel on the left side.</para>

            <para><emphasis role="bold">Note:</emphasis> If you did not
            specify a value in the <emphasis>Number of nodes for Roxie cluster
            </emphasis>field when you first set up your environment, you will
            not have a Roxie Cluster. To add a Roxie Cluster component:
            Right-click on the <emphasis role="bold">Software</emphasis>
            component in the Navigator Panel, then select <emphasis
            role="bold">New Components</emphasis> then <emphasis
            role="bold">roxie</emphasis> from the drop lists.</para>
          </listitem>

          <listitem>
            <para>Select the <emphasis role="bold">Servers</emphasis>
            tab.</para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Right-click the Roxie Servers and select
            <guimenuitem>Reconfigure Servers</guimenuitem>.</para>

            <para>
              <graphic fileref="images/CM-112.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Select the computers to use as Servers from the list, then
            press the OK button.</para>

            <para>
              <graphic fileref="images/CM-112-2.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <para>Select the <emphasis role="bold">Redundancy</emphasis>
            tab.</para>
          </listitem>

          <listitem>
            <?dbfo keep-together="always"?>

            <para>Select the redundancy scheme to use. Typically, this is
            cyclic redundancy, as shown below.</para>

            <para>
              <graphic fileref="images/CM-112-1.jpg" vendor="configmgrSS" />
            </para>
          </listitem>

          <listitem>
            <para>Click the <inlinegraphic fileref="images/GS-img01c.png" />
            disk icon to save</para>
          </listitem>

          <listitem>
            <para>Close Configuration Manager by pressing ctrl+C in the
            command window where it is running.</para>
          </listitem>
        </orderedlist>
      </sect2>

      <!--configMgr-ROXIE-Include-SEC4-->

      <?hard-pagebreak ?>

      <xi:include href="XMLGeneration/xml/roxie.xsd.mod.xml"
                  xpointer="element(/1)"
                  xmlns:xi="http://www.w3.org/2001/XInclude" />

      <sect2 id="Topology" role="brk">
        <title>Topology</title>

        <para>This section describes the topology tab.</para>

        <para>
          <graphic fileref="images/CM-img20.jpg" vendor="configmgrSS" />

          <informaltable colsep="0" frame="none" rowsep="0">
            <tgroup cols="2">
              <colspec align="left" colwidth="122.40pt" />

              <colspec />

              <tbody>
                <row>
                  <entry>Attribute name</entry>

                  <entry>Definition</entry>
                </row>

                <row>
                  <entry>
                    <emphasis>Topology</emphasis>
                  </entry>

                  <entry>describes the system topology</entry>
                </row>

                <row>
                  <entry>
                    <emphasis>Cluster - thor</emphasis>
                  </entry>

                  <entry>describes the Thor clusters</entry>
                </row>

                <row>
                  <entry>
                    <emphasis>Cluster - hthor</emphasis>
                  </entry>

                  <entry>describes the hthor clusters</entry>
                </row>

                <row>
                  <entry>
                    <emphasis>Cluster - roxie</emphasis>
                  </entry>

                  <entry>describes the Roxie clusters</entry>
                </row>
              </tbody>
            </tgroup>
          </informaltable>
        </para>
      </sect2>

      <sect2 id="Propogate-configuration-changes" role="brk">
        <title>Distribute Configuration Changes to all Nodes</title>

        <para>Once your environment is set up as desired, you must copy the
        configuration file to the other nodes.</para>

        <para />

        <orderedlist>
          <listitem>
            <para>If it is running, stop the system</para>

            <para>
              <informaltable colsep="1" frame="all" rowsep="1">
                <?dbfo keep-together="always"?>

                <tgroup cols="2">
                  <colspec colwidth="49.50pt" />

                  <colspec />

                  <tbody>
                    <row>
                      <entry>
                        <inlinegraphic fileref="images/caution.png" />
                      </entry>

                      <entry>Be sure system is stopped before attempting to
                      copy the Environment.xml file.</entry>
                    </row>
                  </tbody>
                </tgroup>
              </informaltable>
            </para>
          </listitem>

          <listitem>
            <para>Back up the original environment.xml file</para>

            <programlisting># for example
sudo -u hpcc cp /etc/HPCCSystems/environment.xml /etc/HPCCSystems/environment.bak </programlisting>

            <para>Note: the "live environment.xml file is located in your
            <emphasis role="bold">/etc/HPCCSystems/</emphasis> directory.
            ConfigManager works on files in <emphasis
            role="bold">/etc/HPCCSystems/source</emphasis> directory. You must
            copy from this location to make an environment.xml file
            active.</para>
          </listitem>

          <listitem>
            <para>Copy the NewEnvironment.xml file from the source directory
            to the /etc/HPCCSystems and rename the file to
            environment.xml</para>

            <programlisting># for example
sudo -u hpcc cp /etc/HPCCSystems/source/NewEnvironment.xml /etc/HPCCSystems/environment.xml</programlisting>

            <para />
          </listitem>

          <listitem>
            <para>Copy the /etc/HPCCSystems/environment.xml to the
            /etc/HPCCSystems/ on every node.</para>

            <para />
          </listitem>

          <listitem>
            <para>Restart the HPCC system</para>

            <para>You might prefer to script this process, especially if you
            have many nodes. See the Example Scripts section in the Appendix
            of the Installing_and_RunningtheHPCCPlatform document. You can use
            the scripts as a model to create your own script to copy the
            environment.xml file out to all your nodes.</para>
          </listitem>
        </orderedlist>
      </sect2>
    </sect1>
  </chapter>
</book>