Merge pull request #572 from sakshiarora13/ib_conf_file

Issue #571: Add configuration files for InfiniBand HDR switches

control_plane/input_params/ib_vars.yml

@@ -14,7 +14,7 @@
 
 
 # Default configurations written for :
-  # ----Switch-IB(TM) 2 based EDR InfiniBand 1U Switch, 36 QSFP28 ports----
+  # ----Mellanox Quantum(TM) HDR InfiniBand Switch, 40 QSFP56 ports----
 # Change the configurations as per the switch model to avoid failures
 
 # Subnet Manager: centralized resource used by infiniband
@@ -192,9 +192,25 @@ mellanox_switch_interface_config:
     description: port 36
     config:
       - "no shutdown"
+  ib 1/37:
+    description: port 37
+    config:
+      - "no shutdown"
+  ib 1/38:
+    description: port 38
+    config:
+      - "no shutdown"
+  ib 1/39:
+    description: port 39
+    config:
+      - "no shutdown"
+  ib 1/40:
+    description: port 40
+    config:
+      - "no shutdown"
 
 # save_changes_to_startup: is a boolean flag. By default, this option is set to false.
 # When set to true, it will save the switch's running configuration to the startup configuration file
 # after the role applies its configuration. This will allow the configuration to persist after a
 # restart or power failure.
-save_changes_to_startup: false
+save_changes_to_startup: false

control_plane/input_params/ib_vars_edr.yml

@@ -0,0 +1,200 @@
+# Copyright 2021 Dell Inc. or its subsidiaries. All Rights Reserved.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+
+
+# Default configurations written for :
+  # ----Switch-IB(TM) 2 based EDR InfiniBand 1U Switch, 36 QSFP28 ports----
+# Change the configurations as per the switch model to avoid failures
+
+# Subnet Manager: centralized resource used by infiniband
+# to handle the management of the fabric.
+# Cache and Log directories of subnet manager
+# container are mounted to below mentioned path on host.
+
+# cache_directory: opensm stores certain data to the disk such that
+# subsequent runs are consistent. The default directory used is /var/cache/opensm.
+# The following files are included in it: guid2lid, guid2mkey, neighbors
+
+# log_directory: controls the directory in which the temporary files
+# generated by opensm are created. These files are: opensm-subnet.lst,
+# opensm.fdbs, and opensm.log. By default, this directory is /var/log.
+
+subnet_manager:
+  cache_directory: /var/cache/opensm
+  log_directory: /var/log
+
+# mellanox_switch_config: list of configuration lines to apply to the switch.
+  # Example:
+    # mellanox_switch_config:
+      # - Command 1
+      # - Command 2
+  # By default, the list is empty.
+mellanox_switch_config:
+
+# mellanox_switch_interface_config: contains interface configuration.
+  # It is a dict mapping switch interface names to configuration dicts.
+  # Each dict may contain the following items:
+    # description - a description to apply to the interface.
+    # config - a list of per-interface configuration.
+mellanox_switch_interface_config:
+  ib 1/1:
+    description: port 1
+    config:
+      - "no shutdown"
+  ib 1/2:
+    description: port 2
+    config:
+      - "no shutdown"
+  ib 1/3:
+    description: port 3
+    config:
+      - "no shutdown"
+  ib 1/4:
+    description: port 4
+    config:
+      - "no shutdown"
+  ib 1/5:
+    description: port 5
+    config:
+      - "no shutdown"
+  ib 1/6:
+    description: port 6
+    config:
+      - "no shutdown"
+  ib 1/7:
+    description: port 7
+    config:
+      - "no shutdown"
+  ib 1/8:
+    description: port 8
+    config:
+      - "no shutdown"
+  ib 1/9:
+    description: port 9
+    config:
+      - "no shutdown"
+  ib 1/10:
+    description: port 10
+    config:
+      - "no shutdown"
+  ib 1/11:
+    description: port 11
+    config:
+      - "no shutdown"
+  ib 1/12:
+    description: port 12
+    config:
+      - "no shutdown"
+  ib 1/13:
+    description: port 13
+    config:
+      - "no shutdown"
+  ib 1/14:
+    description: port 14
+    config:
+      - "no shutdown"
+  ib 1/15:
+    description: port 15
+    config:
+      - "no shutdown"
+  ib 1/16:
+    description: port 16
+    config:
+      - "no shutdown"
+  ib 1/17:
+    description: port 17
+    config:
+      - "no shutdown"
+  ib 1/18:
+    description: port 18
+    config:
+      - "no shutdown"
+  ib 1/19:
+    description: port 19
+    config:
+      - "no shutdown"
+  ib 1/20:
+    description: port 20
+    config:
+      - "no shutdown"
+  ib 1/21:
+    description: port 21
+    config:
+      - "no shutdown"
+  ib 1/22:
+    description: port 22
+    config:
+      - "no shutdown"
+  ib 1/23:
+    description: port 23
+    config:
+      - "no shutdown"
+  ib 1/24:
+    description: port 24
+    config:
+      - "no shutdown"
+  ib 1/25:
+    description: port 25
+    config:
+      - "no shutdown"
+  ib 1/26:
+    description: port 26
+    config:
+      - "no shutdown"
+  ib 1/27:
+    description: port 27
+    config:
+      - "no shutdown"
+  ib 1/28:
+    description: port 28
+    config:
+      - "no shutdown"
+  ib 1/29:
+    description: port 29
+    config:
+      - "no shutdown"
+  ib 1/30:
+    description: port 30
+    config:
+      - "no shutdown"
+  ib 1/31:
+    description: port 31
+    config:
+      - "no shutdown"
+  ib 1/32:
+    description: port 32
+    config:
+      - "no shutdown"
+  ib 1/33:
+    description: port 33
+    config:
+      - "no shutdown"
+  ib 1/34:
+    description: port 34
+    config:
+      - "no shutdown"
+  ib 1/35:
+    description: port 35
+    config:
+      - "no shutdown"
+  ib 1/36:
+    description: port 36
+    config:
+      - "no shutdown"
+
+# save_changes_to_startup: is a boolean flag. By default, this option is set to false.
+# When set to true, it will save the switch's running configuration to the startup configuration file
+# after the role applies its configuration. This will allow the configuration to persist after a
+# restart or power failure.
+save_changes_to_startup: false