|
|
@@ -113,6 +113,7 @@ It is recommended that the ansible-vault view or edit commands are used and not
|
|
|
|
|
|
## What to do if the LC is not ready?
|
|
|
* Ensure the LC is in a ready state for all the servers.
|
|
|
+* Command to check lc is busy or not: `racadm getremoteservicesstatus`
|
|
|
* Launch iDRAC template.
|
|
|
|
|
|
## What to do if the network CIDR entry of iDRAC IP in /etc/exports file is missing?
|
|
|
@@ -127,6 +128,15 @@ It is recommended that the ansible-vault view or edit commands are used and not
|
|
|
## Is Disabling 2FA supported by Omnia?
|
|
|
* Disabling 2FA is not supported by Omnia and must be manually disabled.
|
|
|
|
|
|
+## Is provisioning server using BOSS controller supported by Omnia?
|
|
|
+* Provisioning server using BOSS controller is not supported by Omnia. It will be supported in upcoming releases.
|
|
|
+
|
|
|
## The provisioning of PowerEdge servers failed. How do I clean up before starting over?
|
|
|
1. Delete the respective iDRAC IP addresses from the *provisioned_idrac_inventory* on the AWX UI or delete the *provisioned_idrac_inventory* to delete the iDRAC IP addresses of all the servers in the cluster.
|
|
|
-2. Launch the iDRAC template from the AWX UI.
|
|
|
+2. Launch the iDRAC template from the AWX UI.
|
|
|
+
|
|
|
+## What to do when WARNING message regarding older firmware displayed during idrac_template execution and idrac_template task failed?
|
|
|
+Potential Cause: Older firmware version in PowerEdge servers. Omnia supports only iDRAC 8 based Dell EMC PowerEdge Servers with firmware versions 2.75.75.75 and above and iDRAC 9 based Dell EMC PowerEdge Servers with Firmware versions 4.40.40.00 and above.
|
|
|
+
|
|
|
+1. Update idrac firmware version in PowerEdge servers manually to the supported version.
|
|
|
+2. Re-run idrac_template.
|
abhishek-s-a