Issue #801: Updating release versions on docs

Signed-off-by: cgoveas <cassandra.goveas@dell.com>

control_plane/input_params/ib_vars_edr.yml

@@ -1,200 +1,200 @@
-# Copyright 2021 Dell Inc. or its subsidiaries. All Rights Reserved.
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-
-# Default configurations written for :
-  # ----Switch-IB(TM) 2 based EDR InfiniBand 1U Switch, 36 QSFP28 ports----
-# Change the configurations as per the switch model to avoid failures
-
-# Subnet Manager: centralized resource used by infiniband
-# to handle the management of the fabric.
-# Cache and Log directories of subnet manager
-# container are mounted to below mentioned path on host.
-
-# cache_directory: opensm stores certain data to the disk such that
-# subsequent runs are consistent. The default directory used is /var/cache/opensm.
-# The following files are included in it: guid2lid, guid2mkey, neighbors
-
-# log_directory: controls the directory in which the temporary files
-# generated by opensm are created. These files are: opensm-subnet.lst,
-# opensm.fdbs, and opensm.log. By default, this directory is /var/log.
-
-subnet_manager:
-  cache_directory: /var/cache/opensm
-  log_directory: /var/log
-
-# mellanox_switch_config: list of configuration lines to apply to the switch.
-  # Example:
-    # mellanox_switch_config:
-      # - Command 1
-      # - Command 2
-  # By default, the list is empty.
-mellanox_switch_config:
-
-# mellanox_switch_interface_config: contains interface configuration.
-  # It is a dict mapping switch interface names to configuration dicts.
-  # Each dict may contain the following items:
-    # description - a description to apply to the interface.
-    # config - a list of per-interface configuration.
-mellanox_switch_interface_config:
-  ib 1/1:
-    description: port 1
-    config:
-      - "no shutdown"
-  ib 1/2:
-    description: port 2
-    config:
-      - "no shutdown"
-  ib 1/3:
-    description: port 3
-    config:
-      - "no shutdown"
-  ib 1/4:
-    description: port 4
-    config:
-      - "no shutdown"
-  ib 1/5:
-    description: port 5
-    config:
-      - "no shutdown"
-  ib 1/6:
-    description: port 6
-    config:
-      - "no shutdown"
-  ib 1/7:
-    description: port 7
-    config:
-      - "no shutdown"
-  ib 1/8:
-    description: port 8
-    config:
-      - "no shutdown"
-  ib 1/9:
-    description: port 9
-    config:
-      - "no shutdown"
-  ib 1/10:
-    description: port 10
-    config:
-      - "no shutdown"
-  ib 1/11:
-    description: port 11
-    config:
-      - "no shutdown"
-  ib 1/12:
-    description: port 12
-    config:
-      - "no shutdown"
-  ib 1/13:
-    description: port 13
-    config:
-      - "no shutdown"
-  ib 1/14:
-    description: port 14
-    config:
-      - "no shutdown"
-  ib 1/15:
-    description: port 15
-    config:
-      - "no shutdown"
-  ib 1/16:
-    description: port 16
-    config:
-      - "no shutdown"
-  ib 1/17:
-    description: port 17
-    config:
-      - "no shutdown"
-  ib 1/18:
-    description: port 18
-    config:
-      - "no shutdown"
-  ib 1/19:
-    description: port 19
-    config:
-      - "no shutdown"
-  ib 1/20:
-    description: port 20
-    config:
-      - "no shutdown"
-  ib 1/21:
-    description: port 21
-    config:
-      - "no shutdown"
-  ib 1/22:
-    description: port 22
-    config:
-      - "no shutdown"
-  ib 1/23:
-    description: port 23
-    config:
-      - "no shutdown"
-  ib 1/24:
-    description: port 24
-    config:
-      - "no shutdown"
-  ib 1/25:
-    description: port 25
-    config:
-      - "no shutdown"
-  ib 1/26:
-    description: port 26
-    config:
-      - "no shutdown"
-  ib 1/27:
-    description: port 27
-    config:
-      - "no shutdown"
-  ib 1/28:
-    description: port 28
-    config:
-      - "no shutdown"
-  ib 1/29:
-    description: port 29
-    config:
-      - "no shutdown"
-  ib 1/30:
-    description: port 30
-    config:
-      - "no shutdown"
-  ib 1/31:
-    description: port 31
-    config:
-      - "no shutdown"
-  ib 1/32:
-    description: port 32
-    config:
-      - "no shutdown"
-  ib 1/33:
-    description: port 33
-    config:
-      - "no shutdown"
-  ib 1/34:
-    description: port 34
-    config:
-      - "no shutdown"
-  ib 1/35:
-    description: port 35
-    config:
-      - "no shutdown"
-  ib 1/36:
-    description: port 36
-    config:
-      - "no shutdown"
-
-# save_changes_to_startup: is a boolean flag. By default, this option is set to false.
-# When set to true, it will save the switch's running configuration to the startup configuration file
-# after the role applies its configuration. This will allow the configuration to persist after a
-# restart or power failure.
+# Copyright 2021 Dell Inc. or its subsidiaries. All Rights Reserved.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+
+
+# Default configurations written for :
+  # ----Switch-IB(TM) 2 based EDR InfiniBand 1U Switch, 36 QSFP28 ports----
+# Change the configurations as per the switch model to avoid failures
+
+# Subnet Manager: centralized resource used by infiniband
+# to handle the management of the fabric.
+# Cache and Log directories of subnet manager
+# container are mounted to below mentioned path on host.
+
+# cache_directory: opensm stores certain data to the disk such that
+# subsequent runs are consistent. The default directory used is /var/cache/opensm.
+# The following files are included in it: guid2lid, guid2mkey, neighbors
+
+# log_directory: controls the directory in which the temporary files
+# generated by opensm are created. These files are: opensm-subnet.lst,
+# opensm.fdbs, and opensm.log. By default, this directory is /var/log.
+
+subnet_manager:
+  cache_directory: /var/cache/opensm
+  log_directory: /var/log
+
+# mellanox_switch_config: list of configuration lines to apply to the switch.
+  # Example:
+    # mellanox_switch_config:
+      # - Command 1
+      # - Command 2
+  # By default, the list is empty.
+mellanox_switch_config:
+
+# mellanox_switch_interface_config: contains interface configuration.
+  # It is a dict mapping switch interface names to configuration dicts.
+  # Each dict may contain the following items:
+    # description - a description to apply to the interface.
+    # config - a list of per-interface configuration.
+mellanox_switch_interface_config:
+  ib 1/1:
+    description: port 1
+    config:
+      - "no shutdown"
+  ib 1/2:
+    description: port 2
+    config:
+      - "no shutdown"
+  ib 1/3:
+    description: port 3
+    config:
+      - "no shutdown"
+  ib 1/4:
+    description: port 4
+    config:
+      - "no shutdown"
+  ib 1/5:
+    description: port 5
+    config:
+      - "no shutdown"
+  ib 1/6:
+    description: port 6
+    config:
+      - "no shutdown"
+  ib 1/7:
+    description: port 7
+    config:
+      - "no shutdown"
+  ib 1/8:
+    description: port 8
+    config:
+      - "no shutdown"
+  ib 1/9:
+    description: port 9
+    config:
+      - "no shutdown"
+  ib 1/10:
+    description: port 10
+    config:
+      - "no shutdown"
+  ib 1/11:
+    description: port 11
+    config:
+      - "no shutdown"
+  ib 1/12:
+    description: port 12
+    config:
+      - "no shutdown"
+  ib 1/13:
+    description: port 13
+    config:
+      - "no shutdown"
+  ib 1/14:
+    description: port 14
+    config:
+      - "no shutdown"
+  ib 1/15:
+    description: port 15
+    config:
+      - "no shutdown"
+  ib 1/16:
+    description: port 16
+    config:
+      - "no shutdown"
+  ib 1/17:
+    description: port 17
+    config:
+      - "no shutdown"
+  ib 1/18:
+    description: port 18
+    config:
+      - "no shutdown"
+  ib 1/19:
+    description: port 19
+    config:
+      - "no shutdown"
+  ib 1/20:
+    description: port 20
+    config:
+      - "no shutdown"
+  ib 1/21:
+    description: port 21
+    config:
+      - "no shutdown"
+  ib 1/22:
+    description: port 22
+    config:
+      - "no shutdown"
+  ib 1/23:
+    description: port 23
+    config:
+      - "no shutdown"
+  ib 1/24:
+    description: port 24
+    config:
+      - "no shutdown"
+  ib 1/25:
+    description: port 25
+    config:
+      - "no shutdown"
+  ib 1/26:
+    description: port 26
+    config:
+      - "no shutdown"
+  ib 1/27:
+    description: port 27
+    config:
+      - "no shutdown"
+  ib 1/28:
+    description: port 28
+    config:
+      - "no shutdown"
+  ib 1/29:
+    description: port 29
+    config:
+      - "no shutdown"
+  ib 1/30:
+    description: port 30
+    config:
+      - "no shutdown"
+  ib 1/31:
+    description: port 31
+    config:
+      - "no shutdown"
+  ib 1/32:
+    description: port 32
+    config:
+      - "no shutdown"
+  ib 1/33:
+    description: port 33
+    config:
+      - "no shutdown"
+  ib 1/34:
+    description: port 34
+    config:
+      - "no shutdown"
+  ib 1/35:
+    description: port 35
+    config:
+      - "no shutdown"
+  ib 1/36:
+    description: port 36
+    config:
+      - "no shutdown"
+
+# save_changes_to_startup: is a boolean flag. By default, this option is set to false.
+# When set to true, it will save the switch's running configuration to the startup configuration file
+# after the role applies its configuration. This will allow the configuration to persist after a
+# restart or power failure.
 save_changes_to_startup: false

control_plane/roles/control_plane_common/tasks/fetch_base_inputs.yml

@@ -174,6 +174,11 @@
     success_msg: "{{ success_awx_organization }}"
     fail_msg: "{{ fail_awx_organization }}"
 
+- name: Convert timezone.txt to linux format
+  command: dos2unix {{ role_path }}/files/timezone.txt
+  failed_when: false
+  changed_when: false
+
 - name: Check timezone file
   command: grep -Fx "{{ timezone }}" {{ role_path }}/files/timezone.txt
   failed_when: false

control_plane/roles/control_plane_customiso/tasks/check_prerequisites.yml

@@ -23,8 +23,8 @@
   command: ansible-galaxy collection install {{ item }}
   changed_when: true
   with_items:
-   - community.general
-   - dellemc.openmanage
+   - community.general:4.4.0
+   - dellemc.openmanage:4.4.0
 
 - name: Install omsdk using pip
   pip:
@@ -50,4 +50,4 @@
     path: "{{ role_path }}/../provision_idrac/files/{{ management_station_ip_file }}"
     line: "{{ mngmnt_network_ip }}"
     mode: "{{ file_permission }}"
-    create: yes
+    create: yes

control_plane/roles/control_plane_customiso/tasks/create_unattended_iso.yml

@@ -45,10 +45,16 @@
 
 - name: ISO creation - rocky
   block:
+
+    - name: Fetch rocky profile name
+      shell: set -o pipefail && grep 'Rocky-8' {{ tmp_iso_dir }}{{ grub_cfg_path }} | head -1
+      register: rocky_profile_name
+      changed_when: false
+
     - name: Create custom ISO
       command: >-
         mkisofs -o /tmp/{{ rocky_iso_filename }} -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4
-        -boot-info-table -eltorito-alt-boot -e images/efiboot.img -no-emul-boot -J -R -V "Rocky-8-4-x86_64-dvd"  {{ tmp_iso_dir }}
+        -boot-info-table -eltorito-alt-boot -e images/efiboot.img -no-emul-boot -J -R -V {{ rocky_profile_name.stdout.split(' ')[4] | replace("'","") }}  {{ tmp_iso_dir }}
       changed_when: true
       register: rocky_iso_status
       tags: install
@@ -77,4 +83,4 @@
   file:
     path: "{{ role_path }}/files/{{ idrac_kickstart_file }}"
     state: absent
-  tags: install
+  tags: install

control_plane/roles/control_plane_device/files/Dockerfile

@@ -1,6 +1,5 @@
 # Dockerfile for creating the management network container
-
-FROM centos:8
+FROM rockylinux/rockylinux:8.5
 
 # RPM REPOs
 RUN dnf install -y \
@@ -10,7 +9,6 @@ RUN dnf install -y \
 
 RUN dnf install -y dhcp-server
 RUN dnf install -y python3-netaddr
-
 RUN yum install -y \
   ansible \
   cronie \
@@ -32,4 +30,4 @@ COPY mngmnt_container_configure.yml /root/
 RUN systemctl enable tftp
 RUN systemctl enable dhcpd
 
-CMD ["sbin/init"]
+CMD ["sbin/init"]

control_plane/roles/control_plane_ib/files/Dockerfile

@@ -1,13 +1,11 @@
 # Dockerfile for creating the management network container
-
-FROM centos:8
+FROM rockylinux/rockylinux:8.5
 
 # RPM REPOs
 RUN dnf install -y \
     epel-release \
     && dnf clean all \
     && rm -rf /var/cache/dnf
-
 RUN dnf install dhcp-server -y
 RUN yum install -y \
   ansible \
@@ -23,4 +21,4 @@ COPY dhcpd.conf  /etc/dhcp/dhcpd.conf
 
 RUN systemctl enable dhcpd
 
-CMD ["sbin/init"]
+CMD ["sbin/init"]

control_plane/roles/control_plane_sm/files/Dockerfile

@@ -1,15 +1,11 @@
-FROM centos:8
+FROM rockylinux/rockylinux:8.5
 
 RUN dnf -y update && dnf clean all
-
 RUN dnf install -y epel-release
-
 RUN dnf groupinstall "Infiniband Support" -y
-
 RUN dnf install -y opensm
 
 COPY opensm.conf /etc/rdma/opensm.conf
-
 COPY start.sh /
 
 RUN chmod +x /start.sh

control_plane/roles/provision_cobbler/files/Dockerfile

@@ -1,21 +1,11 @@
-FROM centos:8.3.2011
+FROM rockylinux/rockylinux:8.5
 
-# RPM REPOs
 RUN dnf install -y \
     epel-release \
     && dnf clean all \
     && rm -rf /var/cache/dnf
 
-RUN dnf update -y \
-    && dnf clean all \
-    && rm -rf /var/cache/dnf
-
-RUN dnf install -y git
-RUN git clone -b v3.2.2 https://github.com/cobbler/cobbler.git
-RUN cd cobbler/
-
 RUN mkdir /root/omnia
-
 RUN dnf install -y mod_ssl \
         python3-librepo \
         python3-schema \
@@ -44,11 +34,14 @@ RUN dnf install -y mod_ssl \
         && dnf clean all \
         &&  rm -rf /var/cache/dnf
 
-RUN yum install -y  grub2-efi-x64 shim-x64 
+RUN yum install -y  grub2-efi-x64 shim-x64
 RUN yum install -y yum-utils
 RUN dnf config-manager --set-enabled powertools
 RUN dnf install -y python3-sphinx
 RUN pip3 install wheel
+RUN dnf module enable -y cobbler
+RUN dnf install -y cobbler
+RUN dnf install -y cobbler-web
 
 #Copy Configuration files
 COPY settings.yaml /etc/cobbler/settings.yaml

control_plane/roles/provision_cobbler/files/cobbler_configurations.yml

@@ -22,18 +22,6 @@
     debug:
       msg: "Hiii! I am cobbler"
 
-  - name: Make
-    command: make rpms
-    args:
-      chdir: /cobbler
-    changed_when: false
-
-  - name: Install cobbler and cobbler-web
-    command: dnf install -y cobbler-3.2.2-1.el8.noarch.rpm cobbler-web-3.2.2-1.el8.noarch.rpm
-    args:
-      chdir: /cobbler/rpm-build
-    changed_when: false
-  
   - name: Run script
     shell: sh ./mkgrub.sh
     args:
@@ -49,18 +37,6 @@
         LoadModule wsgi_module modules/mod_wsgi_python3.so
         LoadModule proxy_module modules/mod_proxy.so
 
-  - name: Cobbler web
-    blockinfile:
-      state: present
-      insertafter: '^<VirtualHost '
-      path: /etc/httpd/conf.d/cobbler_web.conf
-      block: |
-         ServerName localhost
-         SSLEngine on
-         SSLCipherSuite PROFILE=SYSTEM
-         SSLCertificateFile /etc/pki/tls/certs/localhost.crt
-         SSLCertificateKeyFile /etc/pki/tls/private/localhost.key
-
   - name: Add settings to http
     shell: echo "LoadModule wsgi_module modules/mod_wsgi_python3.so" >/etc/httpd/conf.d/wsgi.conf
     changed_when: false
@@ -90,6 +66,7 @@
 
   - name: Adding curl
     shell: export PATH="/usr/bin/curl:$PATH"
+    changed_when: false
 
   - name: Run import command
     command: cobbler import --arch=x86_64 --path=/mnt --name="{{ name_iso }}"
@@ -134,7 +111,7 @@
 
   - name: Syncing of cobbler
     command: cobbler sync
-    changed_when: false 
+    changed_when: false
 
   - name: Restart cobblerd, http, xinetd and dhcpd
     service:

control_plane/roles/webui_awx/files/requirements.yml

@@ -1,5 +1,8 @@
 ---
 collections:
-  - community.general
-  - dellemc.openmanage
-  - dellemc.os10
+  - name: community.general
+    version: 4.4.0
+  - name: dellemc.openmanage
+    version: 4.4.0
+  - name: dellemc.os10
+    version: 1.1.1

control_plane/roles/webui_awx/vars/main.yml

@@ -71,7 +71,7 @@ credential_details:
   - { name: ethernet_credential, type: Machine, username: "{{ ethernet_switch_username }}", password: "{{ ethernet_switch_password }}", flag: "{{ ethernet_switch_support }}" }
   - { name: infiniband_credential, type: Network, username: "{{ ib_username }}", password: "{{ ib_password }}", flag: "{{ ib_switch_support }}" }
   - { name: powervault_me4_credential, type: Network, username: "{{ powervault_me4_username }}", password: "{{ powervault_me4_password }}", flag: "{{ powervault_support }}" }
-  - { name: node_credential, type: Machine, username: root, password: omnia@123, flag: true }
+  - { name: node_credential, type: Machine, username: root, password: "{{ provision_password }}", flag: true }
 job_template_details:
   - { name: idrac_template, inventory: idrac_inventory, playbook: control_plane/idrac.yml, credential: idrac_credential, flag: true }
   - { name: ethernet_template, inventory: ethernet_inventory, playbook: control_plane/ethernet.yml, credential: ethernet_credential, flag: "{{ ethernet_switch_support }}" }
@@ -83,4 +83,4 @@ omnia_job_template_details:
   - { name: deploy_omnia_template, inventory: node_inventory, playbook: omnia.yml, credential: node_credential }  
 scheduled_templates:
   - { name: NodeInventorySchedule, template: node_inventory_job, schedule_rule: "DTSTART:20210815T120000Z RRULE:FREQ=MINUTELY;INTERVAL=10" }
-  - { name: DeviceInventorySchedule, template: device_inventory_job, schedule_rule: "DTSTART:20210815T060000Z RRULE:FREQ=DAILY;INTERVAL=1"}
+  - { name: DeviceInventorySchedule, template: device_inventory_job, schedule_rule: "DTSTART:20210815T060000Z RRULE:FREQ=DAILY;INTERVAL=1"}

docs/README.md

@@ -1,10 +1,10 @@
 **Omnia** (Latin: all or everything) is a deployment tool to configure Dell EMC PowerEdge servers running standard RPM-based Linux OS images into clusters capable of supporting HPC, AI, and data analytics workloads. It uses Slurm, Kubernetes, and other packages to manage jobs and run diverse workloads on the same converged solution. It is a collection of [Ansible](https://ansible.com) playbooks, is open source, and is constantly being extended to enable comprehensive workloads.
 
 #### Current release version
-1.1.1
+1.1.2
 
 #### Previous release version
-1.1  
+1.1.1
 
 ## Blogs about Omnia
 - [Introduction to Omnia](https://infohub.delltechnologies.com/p/omnia-open-source-deployment-of-high-performance-clusters-to-run-simulation-ai-and-data-analytics-workloads/)
@@ -46,8 +46,8 @@ The following table lists the software and operating system requirements on the
 
 Requirements  |   Version
 ----------------------------------  |   -------
-OS pre-installed on the management station  |  CentOS 8.4/ Rocky 8.4
-OS deployed by Omnia on bare-metal Dell EMC PowerEdge Servers | CentOS 7.9 2009 Minimal Edition/ Rocky 8.4 Minimal Edition
+OS pre-installed on the management station  |  CentOS 8 / Rocky 8
+OS deployed by Omnia on bare-metal Dell EMC PowerEdge Servers | CentOS 7 2009 Minimal Edition/ Rocky 8 Minimal Edition
 Cobbler  |  3.2.2
 Ansible AWX  |  19.1.0
 Slurm Workload Manager  |  20.11.2
@@ -72,10 +72,10 @@ The following table lists the software and its compatible version managed by Omn
 
 Software	|	License	|	Compatible Version	|	Description
 -----------	|	-------	|	----------------	|	-----------------
-CentOS Linux release 7.9.2009 (Core)	|	-	|	7.9	|	Operating system on entire cluster except for management station
-Rocky 8.4	|	-	|	8.4	|	Operating system on entire cluster except for management station
-CentOS Linux release 8.4.2105	|	-	|	8.4	|	Operating system on the management station	
-Rocky 8.4	|	-	|	8.4	|	Operating system on the management station
+CentOS Linux release 7 (Core)	|	-	|	7	|	Operating system on entire cluster except for management station
+Rocky 8	|	-	|	8	|	Operating system on entire cluster except for management station
+CentOS Linux release 8	|	-	|	8	|	Operating system on the management station	
+Rocky 8	|	-	|	8	|	Operating system on the management station (Validated with 8.5)
 MariaDB	|	GPL 2.0	|	5.5.68	|	Relational database used by Slurm
 Slurm	|	GNU General Public	|	20.11.7	|	HPC Workload Manager
 Docker CE	|	Apache-2.0	|	20.10.2	|	Docker Service

platforms/roles/kubeflow/tasks/deploy_kubeflow.yml

@@ -1,141 +1,141 @@
-#  Copyright 2020 Dell Inc. or its subsidiaries. All Rights Reserved.
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
----
-
-- name: Download kfctl release from the Kubeflow releases page
-  unarchive:
-    src: "{{ kfctl_download_url }}"
-    dest: "{{ kfctl_download_dest_path }}"
-    mode: "{{ kfctl_download_file_mode }}"
-    remote_src: yes
-
-- name: Delete omnia kubeflow directory if exists
-  file:
-    path: "{{ omnia_kubeflow_dir_path }}"
-    state: absent
-
-- name: Create omnia kubeflow directory
-  file:
-    path: "{{ omnia_kubeflow_dir_path }}"
-    state: directory
-    mode: "{{ omnia_kubeflow_dir_mode }}"
-    recurse: yes
-
-- name: Build kubeflow configuration
-  command:
-    cmd: /usr/bin/kfctl build -V -f "{{ kubeflow_config_yaml_url }}"
-    chdir: "{{ omnia_kubeflow_dir_path }}"
-  changed_when: true
-
-- name: Modify CPU limit for istio-ingressgateway-service-account
-  replace:
-    path: "{{ istio_noauth_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: '---'
-    regexp: 'cpu: 100m'
-    replace: 'cpu: 2'
-
-- name: Modify memory limit for istio-ingressgateway-service-account
-  replace:
-    path: "{{ istio_noauth_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: '---'
-    regexp: 'memory: 128Mi'
-    replace: 'memory: 512Mi'
-
-- name: Modify CPU request for istio-ingressgateway-service-account
-  replace:
-    path: "{{ istio_noauth_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: '---'
-    regexp: 'cpu: 10m'
-    replace: 'cpu: 1'
-
-- name: Modify memory request for istio-ingressgateway-service-account
-  replace:
-    path: "{{ istio_noauth_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: '---'
-    regexp: 'memory: 40Mi'
-    replace: 'memory: 256Mi'
-
-- name: Modify memory request for istio-engressgateway-service-account
-  replace:
-    path: "{{ istio_noauth_yaml_file_path }}"
-    after: 'serviceAccountName: istio-egressgateway-service-account'
-    before: '---'
-    regexp: 'memory: 128Mi'
-    replace: 'memory: 256Mi'
-
-- name: Modify memory request for istio-engressgateway-service-account
-  replace:
-    path: "{{ istio_noauth_yaml_file_path }}"
-    after: 'serviceAccountName: istio-egressgateway-service-account'
-    before: '---'
-    regexp: 'memory: 40Mi'
-    replace: 'memory: 128Mi'
-
-- name: Modify CPU limit for kfserving-gateway
-  replace:
-    path: "{{ kfserving_gateway_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: 'env:'
-    regexp: 'cpu: 100m'
-    replace: 'cpu: 2'
-
-- name: Modify memory limit for kfserving-gateway
-  replace:
-    path: "{{ kfserving_gateway_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: 'env:'
-    regexp: 'memory: 128Mi'
-    replace: 'memory: 512Mi'
-
-- name: Modify CPU request for kfserving-gateway
-  replace:
-    path: "{{ kfserving_gateway_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: 'env:'
-    regexp: 'cpu: 10m'
-    replace: 'cpu: 1'
-
-- name: Modify memory request for kfserving-gateway
-  replace:
-    path: "{{ kfserving_gateway_yaml_file_path }}"
-    after: 'serviceAccountName: istio-ingressgateway-service-account'
-    before: 'env:'
-    regexp: 'memory: 40Mi'
-    replace: 'memory: 256Mi'
-
-- name: Change argo base service from NodePort to LoadBalancer
-  replace:
-    path: "{{ argo_yaml_file_path }}"
-    regexp: 'NodePort'
-    replace: 'LoadBalancer'
-
-- name: Change istio-install base istio-noauth service from NodePort to LoadBalancer
-  replace:
-    path: "{{ istio_noauth_yaml_file_path }}"
-    regexp: 'NodePort'
-    replace: 'LoadBalancer'
-
-- name: Apply kubeflow configuration
-  command:
-    cmd: "/usr/bin/kfctl apply -V -f '{{ kubeflow_config_file }}'"
-    chdir: "{{ omnia_kubeflow_dir_path }}"
-  changed_when: true
-  register: apply_kubeflow_config
-  until: apply_kubeflow_config is not failed
-  retries: 20
+#  Copyright 2020 Dell Inc. or its subsidiaries. All Rights Reserved.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+---
+
+- name: Download kfctl release from the Kubeflow releases page
+  unarchive:
+    src: "{{ kfctl_download_url }}"
+    dest: "{{ kfctl_download_dest_path }}"
+    mode: "{{ kfctl_download_file_mode }}"
+    remote_src: yes
+
+- name: Delete omnia kubeflow directory if exists
+  file:
+    path: "{{ omnia_kubeflow_dir_path }}"
+    state: absent
+
+- name: Create omnia kubeflow directory
+  file:
+    path: "{{ omnia_kubeflow_dir_path }}"
+    state: directory
+    mode: "{{ omnia_kubeflow_dir_mode }}"
+    recurse: yes
+
+- name: Build kubeflow configuration
+  command:
+    cmd: /usr/bin/kfctl build -V -f "{{ kubeflow_config_yaml_url }}"
+    chdir: "{{ omnia_kubeflow_dir_path }}"
+  changed_when: true
+
+- name: Modify CPU limit for istio-ingressgateway-service-account
+  replace:
+    path: "{{ istio_noauth_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: '---'
+    regexp: 'cpu: 100m'
+    replace: 'cpu: 2'
+
+- name: Modify memory limit for istio-ingressgateway-service-account
+  replace:
+    path: "{{ istio_noauth_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: '---'
+    regexp: 'memory: 128Mi'
+    replace: 'memory: 512Mi'
+
+- name: Modify CPU request for istio-ingressgateway-service-account
+  replace:
+    path: "{{ istio_noauth_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: '---'
+    regexp: 'cpu: 10m'
+    replace: 'cpu: 1'
+
+- name: Modify memory request for istio-ingressgateway-service-account
+  replace:
+    path: "{{ istio_noauth_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: '---'
+    regexp: 'memory: 40Mi'
+    replace: 'memory: 256Mi'
+
+- name: Modify memory request for istio-engressgateway-service-account
+  replace:
+    path: "{{ istio_noauth_yaml_file_path }}"
+    after: 'serviceAccountName: istio-egressgateway-service-account'
+    before: '---'
+    regexp: 'memory: 128Mi'
+    replace: 'memory: 256Mi'
+
+- name: Modify memory request for istio-engressgateway-service-account
+  replace:
+    path: "{{ istio_noauth_yaml_file_path }}"
+    after: 'serviceAccountName: istio-egressgateway-service-account'
+    before: '---'
+    regexp: 'memory: 40Mi'
+    replace: 'memory: 128Mi'
+
+- name: Modify CPU limit for kfserving-gateway
+  replace:
+    path: "{{ kfserving_gateway_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: 'env:'
+    regexp: 'cpu: 100m'
+    replace: 'cpu: 2'
+
+- name: Modify memory limit for kfserving-gateway
+  replace:
+    path: "{{ kfserving_gateway_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: 'env:'
+    regexp: 'memory: 128Mi'
+    replace: 'memory: 512Mi'
+
+- name: Modify CPU request for kfserving-gateway
+  replace:
+    path: "{{ kfserving_gateway_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: 'env:'
+    regexp: 'cpu: 10m'
+    replace: 'cpu: 1'
+
+- name: Modify memory request for kfserving-gateway
+  replace:
+    path: "{{ kfserving_gateway_yaml_file_path }}"
+    after: 'serviceAccountName: istio-ingressgateway-service-account'
+    before: 'env:'
+    regexp: 'memory: 40Mi'
+    replace: 'memory: 256Mi'
+
+- name: Change argo base service from NodePort to LoadBalancer
+  replace:
+    path: "{{ argo_yaml_file_path }}"
+    regexp: 'NodePort'
+    replace: 'LoadBalancer'
+
+- name: Change istio-install base istio-noauth service from NodePort to LoadBalancer
+  replace:
+    path: "{{ istio_noauth_yaml_file_path }}"
+    regexp: 'NodePort'
+    replace: 'LoadBalancer'
+
+- name: Apply kubeflow configuration
+  command:
+    cmd: "/usr/bin/kfctl apply -V -f '{{ kubeflow_config_file }}'"
+    chdir: "{{ omnia_kubeflow_dir_path }}"
+  changed_when: true
+  register: apply_kubeflow_config
+  until: apply_kubeflow_config is not failed
+  retries: 20
   delay: 10

platforms/roles/kubeflow/tasks/firewalld_config.yml

@@ -1,45 +1,45 @@
-#  Copyright 2020 Dell Inc. or its subsidiaries. All Rights Reserved.
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
----
-
-- name: Install firewalld
-  package:
-    name: firewalld
-    state: present
-  tags: firewalld
-
-- name: Start and enable firewalld
-  service:
-    name: firewalld
-    state: started
-    enabled: yes
-  tags: firewalld
-
-- name: Configure firewalld on master nodes
-  firewalld:
-    port: "{{ item }}/tcp"
-    permanent: yes
-    state: enabled
-  with_items: '{{ kubeflow_firewalld_ports }}'
-  tags: firewalld
-
-- name: Masquerade the firewall
-  command: firewall-cmd --add-masquerade --permanent
-  changed_when: true
-  tags: firewalld
-
-- name: Reload firewalld
-  command: firewall-cmd --reload
-  changed_when: true
+#  Copyright 2020 Dell Inc. or its subsidiaries. All Rights Reserved.
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+---
+
+- name: Install firewalld
+  package:
+    name: firewalld
+    state: present
+  tags: firewalld
+
+- name: Start and enable firewalld
+  service:
+    name: firewalld
+    state: started
+    enabled: yes
+  tags: firewalld
+
+- name: Configure firewalld on master nodes
+  firewalld:
+    port: "{{ item }}/tcp"
+    permanent: yes
+    state: enabled
+  with_items: '{{ kubeflow_firewalld_ports }}'
+  tags: firewalld
+
+- name: Masquerade the firewall
+  command: firewall-cmd --add-masquerade --permanent
+  changed_when: true
+  tags: firewalld
+
+- name: Reload firewalld
+  command: firewall-cmd --reload
+  changed_when: true
   tags: firewalld