# Copyright 2021 Dell Inc. or its subsidiaries. All Rights Reserved.
#
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
---

### Usage: powervault_me4 ###

# User type of powervault_me4
# The vaules supported are "standard" and "SNMPv3"
# The default value is "standard"
powervault_me4_usertype: "standard"

# The user roles for managing and monitoring powervault_me4
# The values supported are "monitor" and "manage"
# The default value is "manage"
# Only "manage" role allows - Addition of disk groups and creation of volumes 
powervault_me4_roles: "manage"

# This variable indicates the language selection
# Currently only "English" is supported
locale: "English"

# Specify the system name to identify the system
# By default it is set to "Uninitialized Name"
powervault_me4_system_name: "Unintialized Name"

# Specify the snmp notification level
# critical: Sends notifications for Critical events only.
# error: Sends notifications for Error and Critical events.
# warn: Sends notifications for Warning, Error, and Critical events.
# resolved: Sends notifications for Resolved, Warning, Error, and Critical events.
# info: Sends notifications for all events.
# none: All events are excluded from trap notification and traps are disabled. 
# However, Critical events and managed-logs events 400–402 are sent regardless of the notification setting.
# Default value is "none"
powervault_me4_snmp_notify_level: "none"

# Specify the disk group name
# If left blank, system automatically assigns the name
powervault_me4_disk_group_name: ""

# Specify the disk type
# Values supported are "Virtual" and "Read Cache"
powervault_me4_disk_type: "Virtual"

# Specify the required RAID Level
# The different RAID levels and the min and max number of disks supported for each RAID are
# RAID1: 2
# RAID5: 3-16
# RAID6: 4-16
# RAID10: 4-16
# ADAPT: 12-128
# Default value is "RAID1"
# If Type "Read Cache" is selected, then RAID levels are not required
powervault_me4_raid_levels: "RAID1"

# Specify the range of disks
# Select a range of disks within an enclosure by entering a comma-separated list that contains 
# the enclosure number and disk range in the Enter Range of Disks text box. 
# Use the format enclosure-number.disk-range,enclosure-number.disk-range. 
# For example, to select disks 3-12 in enclosure 1 and 5-23 in enclosure 2, enter 1.3-12,2.5-23.
# For ME4012 - 0.0-0.11,1.0-1.11 are the allowed values
powervault_me4_disk_range: ""

# Specify the volume name
# Cannot be left blank
# the default value is "pv_omnia"
powervault_me4_volume_name: "pv_omnia"

# Specify the volume size
# Format: 100GB <SizeGB>
powervault_me4_volume_size: "100GB"