# Copyright 2020 Dell Inc. or its subsidiaries. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. --- # Password used while deploying OS on bare metal servers and for Cobbler UI. # The Length of the password should be at least 8. # The password must not contain -,\, '," provision_password: "omnia@123" # Password used for the AWX UI. # The Length of the password should be at least 8. # The password must not contain -,\, '," awx_password: "omnia@123" # The nic/ethernet card that needs to be connected to the HPC switch. # This nic will be configured by Omnia for the DHCP server. # Default value of nic is em1. hpc_nic: "em1" # The nic/ethernet card that will be connected to the public internet. # Default value of nic is em2 public_nic: "em2" # This is the path where user has kept the iso image that needs to be provisioned in target nodes. # The iso file should be CentOS7-2009-minimal edition. # Other iso files are not supported. iso_file_path: "/root/CentOS-7-x86_64-Minimal-2009.iso" # The mapping file consists of the MAC address and its respective IP address and hostname. # The format of mapping file should be MAC,hostname,IP and must be a CSV file. # A template for mapping file exists in omnia/examples and is named as mapping_file.csv. # This depicts the path where user has kept the mapping file for DHCP configurations. mapping_file_path: "" # The dhcp range for assigning the IPv4 address to the baremetal nodes. # Example: 10.1.23.1 dhcp_start_ip_range: "172.17.0.10" dhcp_end_ip_range: "172.17.0.100"