EXAMPLE_SYSTEM_DESIGNS.md 1.6 KB
Example system designs
Omnia can configure systems which use Ethernet or Infiniband-based fabric to connect the compute servers.
Network Setup
With Omnia 1.2, only the management station requires internet access. In such a situation, the network topology would follow the below diagram:
If the user would like to have all compute nodes connect to the internet, the following network diagram can be followed.
Network Topology
Possible network configurations include:
- A flat topology where all nodes are connected to a switch which includes an uplink to the internet. This requires multiple externally-facing IP addresses
A hierarchical topology where compute nodes are connected to a common switch, but the manager node contains a second network connection which is connected to the internet. All outbound/inbound traffic would be routed through the manager node. This requires setting up firewall rules for IP masquerade, see here for an example.
IP and Hostname Assignment
The recommended setup is to assign IP addresses to individual servers. This can be done manually by logging onto each node, or via DHCP.