Dell-Omnia-Clusters-HPC-AI/appliance/appliance_config.yml

# Copyright 2020 Dell Inc. or its subsidiaries. All Rights Reserved.
#
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
---

# Password used while deploying OS on bare metal servers and for Cobbler UI.
# The Length of the password should be at least 8.
# The password must not contain -,\, ',"
provision_password: ""

# Password used for the AWX UI.
# The Length of the password should be at least 8.
# The password must not contain -,\, ',"
awx_password: ""

# The nic/ethernet card that needs to be connected to the HPC switch.
# This nic will be configured by Omnia for the DHCP server.
# Default value of nic is em1.
hpc_nic: "em1"

# The nic/ethernet card that will be connected to the public internet.
# Default value of nic is em2
public_nic: "em2"

# This is the  path where user has kept the iso image that needs to be provisioned in target nodes.
# The iso file should be CentOS7-2009-minimal edition.
# Other iso file not supported.
iso_file_path: ""

# The mapping file consists of the MAC address and its respective IP address and hostname.
# The format of mapping file should be MAC,hostname,IP and must be a CSV file.
# A template for mapping file exists in omnia/examples and is named as mapping_file.csv.
# This depicts the path where user has kept the mapping file for DHCP configurations.
mapping_file_path: ""

# The dhcp range for assigning the IPv4 address to the baremetal nodes.
# Example: 10.1.23.1
dhcp_gateway: ""
dhcp_dns1: ""
dhcp_dns2: ""
dhcp_start_ip_range: ""
dhcp_end_ip_range: ""

# This is the timezone that will be set during provisioning of OS
# Available timezone are provided in list appliance/common/files/timezone.txt
# Default timezone will be set to "GMT"
# Some of the other available timezone are EST,CET,MST,CST6CDT,PST8PDT
timezone: "GMT"