Install the Omnia Control Plane

Typical layout of a HPC cluster supported by Omnia 1.1

Using Omnia 1.1, you can provision and monitor hardware devices such as servers, storage devices, network switches, and InfiniBand switches in an HPC cluster. To enable Omnia to provision or configure the supported hardware devices, Omnia requires the following connections to be made available in your HPC cluster environment.

Connecting a Pass-Through Switch: Provision and configure a 1GBE pass-through switch which will be used as a pass-through uplink switch. One of the NIC on the management station must be connected to a data port on the pass-through switch and a second connection must be established from a data port on the pass-through switch to the management port of the TOR network switch.
>> Note: Omnia is not responsible for provisioning and configuring the pass-through switch.
Establishing a management network: From the data ports on the pass-through switch, connect to the following ports:
- iDRAC ports on manager and compute nodes
- Management port on the network switches
- Management port on the PowerVault devices
- Management port on the InfiniBand switches

Through this management network, management DHCP assigns IP addresses to the devices in the HPC cluster.

Establishing a data network:
- Connect one of the data ports on the PowerVault device to the NIC of the compute node.
- For InfiniBand DHCP, connect NIC on the management station to one of the data ports of the InfiniBand Switch. Next, connect one of the data ports of the InfiniBand switch to the NIC on the compute node.
Establishing a host network: For Cobbler DHCP to assign an IP address to the compute node NIC, connect NIC of the management station to the data port on the network switch. Connect another data port on the network switch to the NIC on the compute node. Omnia will provision OS on the compute nodes using PXE when the iDRAC Enterprise license is missing on any of the compute nodes in the HPC cluster.

Depending on the pass-through switch configured in your HPC environment, the number of racks will be limited based on the number of ports available on the pass-through switch. To support additional racks, you can form an L1-L2 topology and configure a network of Passthrough Switches. A typical layout of an HPC cluster with a network of pass-through switches is as per the following illustration:

Prerequisites to install the Omnia Control Plane version 1.1

Ensure that a stable Internet connection is available on management station, manager node, login node, and compute nodes.
CentOS 8.4 is installed on the management station.
To provision the bare metal servers, go to http://isoredirect.centos.org/centos/7/isos/x86_64/ and download the CentOS-7-x86_64-Minimal-2009 ISO file.
For DHCP configuration, you can provide a host mapping file. If the mapping file is not provided and the variable is left blank, a default mapping file will be created. The provided details must be in the format: MAC address, Hostname, IP address, Component_role. For example, 10:11:12:13,server1,100.96.20.66,compute and 14:15:16:17,server2,100.96.22.199,manager are valid entries.
>> Note:
- In the omnia/examples folder, a mapping_host_file.csv template is provided which can be used for DHCP configuration. The header in the template file must not be deleted before saving the file.
- The Hostname should not contain the following characters: , (comma), . (period) or _ (underscore). However, the domain name is allowed commas and periods.
- The Hostname cannot start or end with a hyphen (-).
Connect one of the Ethernet cards on the management station to the HPC switch and the other Ethernet card must be connected to the global network.
If SELinux is not disabled on the management station, disable it from /etc/sysconfig/selinux and restart the management station.
You must have root privileges to perform installations and configurations using the Omnia control plane.
On the management station, ensure that Python 3.6 and Ansible are installed.
- Run the following commands to install Python 3.6:
  dnf install epel-release -y dnf install python3 -y
- Run the following commands to install Ansible: pip3.6 install --upgrade pip python3.6 -m pip install ansible After the installation is complete, run ansible --version to verify if the installation is successful. In the output, ensure that the executable location path is present in the PATH variable by running echo $PATH. If executable location path is not present, update the path by running export PATH=$PATH:<executable location>\.
For example,
```
ansible -- version
ansible 2.10.9
config file = None
configured module search path = ['/root/.ansible/plugins/modules', '/usr/share/ansible/plugins/modules']
ansible python module location = /usr/local/lib/python3.6/site-packages/ansible
executable location = /usr/local/bin/ansible
python version = 3.6.8 (default, Aug 24 2020, 17:57:11) [GCC 8.3.1 20191121 (Red Hat 8.3.1-5)]
```
The executable location is /usr/local/bin/ansible. Update the path by running the following command:
```
export PATH=$PATH:/usr/local/bin
```
Note: To deploy Omnia, Python 3.6 provides bindings to system tools such as RPM, DNF, and SELinux. As versions greater than 3.6 do not provide these bindings to system tools, ensure that you install Python 3.6 with dnf.

Note: If Ansible version 2.9 or later is installed, ensure it is uninstalled before installing a newer version of Ansible. Run the following commands to uninstall Ansible before upgrading to newer version.
1. pip uninstall ansible
2. pip uninstall ansible-base (if ansible 2.9 is installed)
3. pip uninstall ansible-core (if ansible 2.10 > version is installed)
- On the management station, run the following commands to install Git: dnf install epel-release -y dnf install git -y

Note:

After the installation of the Omnia appliance, changing the management station is not supported. If you need to change the management station, you must redeploy the entire cluster.

If there are errors while executing any of the Ansible playbook commands, then re-run the commands.

Steps to deploy the Omnia Control Plane

On the management station, change the working directory to the directory where you want to clone the Omnia Git repository.
Clone the Omnia repository using the command: git clone https://github.com/dellhpc/omnia.git
Change the directory to omnia using the command: cd omnia
Edit the omnia_config.yml file to:
Specify the Kubernetes version which will be installed on the manager and compute nodes in the k8s_version variable. By default, it is set to 1.16.7. Edit this variable to change the version. Supported versions are 1.16.7 and 1.19.3.
To configure a login node in the cluster. By default, the login_node_required variable is set to "true". Using the login node, cluster administrators can provide access to users to log in to the login node to schedule Slurm jobs. However, if you do not want to configure the login node, then you can set the variable to "false". Without the login node, Slurm jobs can be scheduled only through the manager node. To configure the login node, edit the following variables: * domain_name: Domain name you intend to configure. * realm_name: A realm name is often, but not always, the upper case version of the name of the DNS domain over which it presides. * directory_manager_password: Password of the Directory Manager with full access to the directory for system management tasks. * ipa_admin_password: "admin" user password for the IPA server.
Provide passwords for mariaDB Database (for Slurm accounting), Kubernetes Pod Network CIDR, Kubernetes CNI under mariadb_password and k8s_cni respectively.

Note:

Supported values for Kubernetes CNI are calico and flannel. The default value of CNI considered by Omnia is calico.

The default value of Kubernetes Pod Network CIDR is 10.244.0.0/16. If 10.244.0.0/16 is already in use within your network, select a different Pod Network CIDR. For more information, see https://docs.projectcalico.org/getting-started/kubernetes/quickstart.

The default path of the Ansible configuration file is /etc/ansible/. If the file is not present in the default path, then edit the ansible_conf_file_path variable to update the configuration path.

Change the directory to control_plane/input_params using the command: cd omnia/control_plane/input_params
Edit the base_vars.yml file to update the following variables:

| Variables

[Required/ Optional] | Default, choices | Description | | ----------- | ----------- | ----------- | ansible_conf_file_path | /etc/ansible | Directory path with the Ansible configuration file (ansible.cfg). If Ansible is installed using pip, provide the directory path. If the path is not provided, it is set as /etc/ansible, by default. | public_nic
[Required]| eno2 | The NIC or Ethernet card connected to the public internet. | appliance_k8s_pod_net_cidr
[Required] | 192.168.0.0/16 | Kubernetes pod network CIDR for appliance k8s network. Ensure this value does not overlap with any of the host networks. | snmp_trap_destination | | Enter an SNMP server IP address to receive SNMP traps from devices in the cluster. If this variable is left blank, SNMP will be disabled. | snmp_community_name
[Required] | public | SNMP community name. | awx_organization | DellEMC | Organization name configured in AWX. | timezone | GMT | Enter a timezone that is set during the provisioning of OS. GMT is set as the default time zone. You can set the time zone to EST, CET, MST, CST6CDT, or PST8PDT. For a list of available time zones, see the appliance/common/files/timezone.txt file. | language | en-US | Set the language used during the provisioning of OS. By default, it is set to en-US. | iso_file_path
[Required] | | Provide the CentOS-7-x86_64-Minimal-2009 ISO file path. This ISO file is used by Cobbler to provision the OS on the compute nodes. Note: It is recommended that the ISO image file is not renamed. And, you must not change the path of this ISO image file as the provisioning of the OS on the compute nodes may be impacted. | mngmnt_network_nic
[Required] | eno1 | NIC or Ethernet card that is connected to the Management Network to provision the devices. By default, it is set to "eno1". | mngmnt_network_dhcp_start_range, mngmnt_network_dhcp_end_range
[Required] | | DHCP range for the Management Network to assign IPv4 addresses. | mngmnt_mapping_file_path | | Enter the file path containing a device mapping file with the MAC addresses and respective IP addresses. A mapping_device_file.csv template file is provided under omnia/examples. Enter the details in the order: MAC address, IP address. For example, 10:11:12:13,1.2.3.4, 14:15:16:17,2.3.4.5, and 18.19.20.21,3.4.5.6 are all valid entries. Ensure that you do not provide any duplicate entries in the file. | host_network_nic
[Required] | eno3 | NIC or Ethernet card that is connected to the Host Network to provision OS on bare metal servers. By default, it is set to "eno3". | host_network_dhcp_start_range, host_network_dhcp_end_range
[Required] | | DHCP range for the Host Network to assign IPv4 addresses. | host_mapping_file_path | | Enter the file path containing a host mapping file with the MAC addresses, hostnames, IP addresses, and component role. A mapping_host_file.csv template file is provided under omnia/examples. Enter the details in the order: MAC address, Hostname, IP address, Component_role. For example, 10:11:12:13,server1,100.96.20.66,compute, 14:15:16:17,server2,100.96.22.199,manager, 18.19.20.21,server3,100.96.23.67,nfs_node, and 22.23.24.25,server4,100.96.23.75,login_node are all valid entries. The Hostname should not contain the following characters: , (comma), . (period), and - (hyphen). Ensure that you do not provide any duplicate entries in the file. |
default_lease_time | 86400, 21600 (6 hours)- 31536000 (1 Year) | Measures (in seconds) the time period an IP is reserved for an assigned NIC. |

Depending on the devices connected in the cluster, you must enable the support and provide other device-specific input parameters in the base_vars.yml file and login_vars.yml files. Click the link specific to the devices:
* PowerSwitches * PowerEdge Servers * InfiniBand Switches * PowerVault Storage

NOTE: The IP address 192.168.25.x is used for PowerVault Storage communications. Therefore, do not use this IP address for other configurations.

Change the directory to control_plane using the command: cd ..
Provided that the host_mapping_file_path is updated as per the provided template, Omnia deploys the control plane and assigns the component roles by executing the omnia.yml file. To deploy the Omnia control plane, run the following command: ansible-playbook control_plane.yml
If the host_mapping_file_path is not provided, then you must manually assign the component roles through the AWX UI. Go to Assign component roles using AWX UI.

Omnia creates a log file which is available at: /var/log/omnia.log.

NOTE: If you want to view or edit the login_vars.yml file, run the following commands:

cd input_params

ansible-vault view login_vars.yml --vault-password-file .login_vault_key or ansible-vault edit login_vars.yml --vault-password-file .login_vault_key.

NOTE: It is suggested that you use the ansible-vault view or edit commands and that you do not use the ansible-vault decrypt or encrypt commands. If you have used the ansible-vault decrypt or encrypt commands, provide 644 permission to login_vars.yml.

Configurations performed by Omnia control plane

After you deploy the Omnia control plane, the devices such as Ethernet switches, InfiniBand Switches, and PowerVault storage devices are configured by Omnia according to the support enabled in the base_vars.yml file. The bare metal servers in the cluster are provisioned with custom CentOS based on the availability of iDRAC Enterprise or Datacenter License on the iDRAC.

Default Ansible AWX configurations

The role used to deploy AWX within the control_plane.yml file: webui_awx.
All the pods are deployed in the specific namespace: awx.
The AWX reference source code repository: https://github.com/ansible/awx.git

Omnia performs the following configurations on AWX:

The organization's name is set to DellEMC.
The project name is set to omnia which is the playbooks directory for the templates.
For networking switches, InfiniBand switches, iDRAC, and PowerVault Storage, four inventories are available- ethernet_inventory, infiniband_inventory, idrac_inventory, provisioned_idrac_inventory, and powervault_me4_inventory.
IP addresses of the hosts are stored in node_inventory.
The device credentials are stored in idrac_credential, ethernet_credential, infiniband_credential, and powervault_me4_credential. The node_credential stores the credentials of nodes in the cluster.
Four groups are created under node_inventory-manager, compute, login, and nfs. All nodes in the inventory are added to these groups from the AWX UI.
iDRAC, networking switches, InfiniBand switches, and PowerVault storage devices can be configured using the respective templates: idrac_template, ethernet_template, infiniband_template, and powervault_me4_template. deploy_omnia_template is used to deploy Kubernetes and Slurm on the compute nodes.
Schedules are created for the node_inventory_job (every 10 minutes) and the device_inventory_job (once daily) to dynamically retrieve and update node and device details to AWX.

Note: The AWX configurations are automatically performed by Omnia, and Dell Technologies recommends that you do not change the default configurations that are provided by Omnia as the functionality may be impacted.

Configuring new devices added to the cluster

For Omnia to configure the devices and to provision the bare metal servers which are introduced newly in the cluster, you must configure the corresponding input parameters and deploy the device-specific template from the AWX UI. Based on the devices added to the cluster, click the respective link to go to configuration section.

Assign component roles using AWX UI

Run kubectl get svc -n awx.
Copy the Cluster-IP address of the awx-ui.
To retrieve the AWX UI password, run kubectl get secret awx-admin-password -n awx -o jsonpath="{.data.password}" | base64 --decode.
Open the default web browser on the management station and enter http://<IP>:8052, where IP is the awx-ui IP address and 8052 is the awx-ui port number. Log in to the AWX UI using the username as admin and the retrieved password.
On the AWX dashboard, under RESOURCES -> Inventories, select node_inventory.
Select the Hosts tab.
To add hosts to the groups, click +.
Select Existing Host, and then select the hosts from the list and add them to the groups--compute, manager, login, or nfs.
If you have set the login_node_required variable in the omnia_config file to "false", then you can skip assigning host to the login node.
If the login_node_required is true, make sure the hostnames of all the nodes in the cluster especially the manager and login node are in the format: hostname.domainname. For example, manager.omnia.test is a valid FQDN. If the Hostname is not set then freeipa server/client installation will fail.
Click SAVE.
To deploy Kubernetes and Slurm containers on PowerEdge Servers, under RESOURCES -> Templates, select deploy_omnia, and then click LAUNCH.
By default, no skip tags are selected, and both Kubernetes and Slurm are deployed.
To install only Kubernetes, enter slurm and select slurm.
To install only Slurm, select and add kubernetes skip tag.

NOTE: If you would like to skip the NFS client setup, enter nfs_client in the skip tag section to skip the k8s_nfs_client_setup role of Kubernetes.

Click NEXT.
Review the details in the PREVIEW window and click LAUNCH to run the DeployOmnia template.

The deploy_omnia_template may not run successfully if:

The manager group contains more than one host.
The manager, compute, login, and nfs groups do not contain a host. Ensure that you assign at least one host node to these groups.
If you have set the login_node_required variable in the omnia_config file to "false", then you can skip assigning host to the login node.
Under Skip Tags, when both kubernetes and slurm tags are selected.

Note: On the AWX UI, hosts will be listed only after few nodes have been provisioned by Omnia. It takes approximately 10 to 15 minutes to display the host details after the provisioning is complete. If a device is provisioned but you are unable to view the host details on the AWX UI, then you can run the following command from omnia -> control_plane -> tools folder to view the hosts which are reachable.

ansible-playbook -i ../roles/collect_node_info/provisioned_hosts.yml provision_report.yml

Install JupyterHub and Kubeflow playbooks

If you want to install JupyterHub and Kubeflow playbooks, you have to first install the JupyterHub playbook and then install the Kubeflow playbook.
To install JupyterHub and Kubeflow playbooks:

From AWX UI, under RESOURCES -> Templates, select DeployOmnia template.
From PLAYBOOK dropdown menu, select platforms/jupyterhub.yml and launch the template to install JupyterHub playbook.
From PLAYBOOK dropdown menu, select platforms/kubeflow.yml and launch the template to install Kubeflow playbook.

Note: When the Internet connectivity is unstable or slow, it may take more time to pull the images to create the Kubeflow containers. If the time limit is exceeded, the Apply Kubeflow configurations task may fail. To resolve this issue, you must redeploy Kubernetes cluster and reinstall Kubeflow by completing the following steps:

Complete the PXE booting of the head and compute nodes.
In the omnia_config.yml file, change the k8s_cni variable value from calico to flannel.
Run the Kubernetes and Kubeflow playbooks.

NOTE: If you want to view or edit the omnia_config.yml file, run the following command:

ansible-vault view omnia_config.yml --vault-password-file .omnia_vault_key -- To view the file.
ansible-vault edit omnia_config.yml --vault-password-file .omnia_vault_key -- To edit the file.

Roles assigned to the compute and manager groups

After DeployOmnia template is run from the AWX UI, the omnia.yml file installs Kubernetes and Slurm, or either Kubernetes or Slurm, as per the selection in the template on the management station. Additionally, appropriate roles are assigned to the compute and manager groups.

Kubernetes roles

The following kubernetes roles are provided by Omnia when omnia.yml file is run:

common role:
- Install common packages on manager and compute nodes
- Docker is installed
- Deploy time ntp/chrony
- Install Nvidia drivers and software components
k8s_common role:
- Required Kubernetes packages are installed
- Starts the docker and Kubernetes services.
k8s_manager role:
- helm package for Kubernetes is installed.
k8s_firewalld role: This role is used to enable the required ports to be used by Kubernetes.
- For head-node-ports: 6443, 2379-2380,10251,10250,10252
- For compute-node-ports: 10250,30000-32767
- For calico-udp-ports: 4789
- For calico-tcp-ports: 5473,179
- For flanel-udp-ports: 8285,8472
k8s_nfs_server_setup role:
- A nfs-share directory, /home/k8snfs, is created. Using this directory, compute nodes share the common files.
k8s_nfs_client_setup role
k8s_start_manager role:
- Runs the /bin/kubeadm init command to initialize the Kubernetes services on manager node.
- Initialize the Kubernetes services in the manager node and create service account for Kubernetes Dashboard
k8s_start_workers role:
- The compute nodes are initialized and joined to the Kubernetes cluster with the manager node.
k8s_start_services role
- Kubernetes services are deployed such as Kubernetes Dashboard, Prometheus, MetalLB and NFS client provisioner

Note:

Whenever the k8s_version, k8s_cni or k8s_pod_network_cidr needs to be modified after the HPC cluster is setup, the OS in the manager and compute nodes in the cluster must be re-flashed before executing omnia.yml again.

After Kubernetes is installed and configured, few Kubernetes and calico/flannel related ports are opened in the manager and compute nodes. This is required for Kubernetes Pod-to-Pod and Pod-to-Service communications. Calico/flannel provides a full networking stack for Kubernetes pods.

If Kubernetes Pods are unable to communicate with the servers (i.e., unable to access the Internet) when the DNS servers are not responding, then the Kubernetes Pod Network CIDR may be overlapping with the host network which is DNS issue. To resolve this issue:

Disable firewalld.service.

If the issue persists, then perform the following actions:
a. Format the OS on manager and compute nodes.
b. In the management station, edit the omnia_config.yml file to change the Kubernetes Pod Network CIDR or CNI value. Suggested IP range is 192.168.0.0/16 and ensure you provide an IP which is not in use in your host network.
c. Execute omnia.yml and skip slurm using --skip-tags slurm.

Slurm roles

The following Slurm roles are provided by Omnia when omnia.yml file is run:

slurm_common role:
- Installs the common packages on manager node and compute node.
slurm_manager role:
- Installs the packages only related to manager node
- This role also enables the required ports to be used by Slurm.
  tcp_ports: 6817,6818,6819
  udp_ports: 6817,6818,6819
- Creating and updating the Slurm configuration files based on the manager node requirements.
slurm_workers role:
- Installs the Slurm packages into all compute nodes as per the compute node requirements.
slurm_start_services role:
- Starting the Slurm services so that communicates with manager node.
slurm_exporter role:
- Slurm exporter is a package for exporting metrics collected from Slurm resource scheduling system to Prometheus.
- Slurm exporter is installed on the host like Slurm, and Slurm exporter will be successfully installed only if Slurm is installed.

Login node roles

To enable the login node, the login_node_required variable must be set to "true" in the omnia_config.yml file.

login_common role: The firewall ports are opened on the manager and login nodes.
login_server role: FreeIPA server is installed and configured on the manager node to provide authentication using LDAP and Kerberos principles.
login_node role: FreeIPA client is installed and configured on the login node and is integrated with the server running on the manager node.

Add a new compute node to the cluster

If a new node is provisioned through Cobbler, the node address is automatically displayed on the AWX dashboard. The node is not assigned to any group. You can add the node to the compute group along with the existing nodes and run omnia.yml to add the new node to the cluster and update the configurations in the manager node.

INSTALL_OMNIA_CONTROL_PLANE.md 27 KB Cronologia Originale