Dell-Omnia-Clusters-HPC-AI/appliance/test/appliance_config_test.yml

# Copyright 2020 Dell Inc. or its subsidiaries. All Rights Reserved.
#
#  Licensed under the Apache License, Version 2.0 (the "License");
#  you may not use this file except in compliance with the License.
#  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
#  limitations under the License.
---

# Password used while deploying OS on bare metal servers and for Cobbler UI.
# The Length of the password should be at least 8.
# The password must not contain -,\, ',"
provision_password: "omnia@123"

# Password used for the AWX UI.
# The Length of the password should be at least 8.
# The password must not contain -,\, ',"
awx_password: "omnia@123"

# The nic/ethernet card that needs to be connected to the HPC switch.
# This nic will be configured by Omnia for the DHCP server.
# Default value of nic is em1.
hpc_nic: "em1"

# The nic/ethernet card that will be connected to the public internet.
# Default value of nic is em2
public_nic: "em2"

# The mapping file consists of the MAC address and its respective IP address and hostname.
# If user wants to provide a mapping file, set this value to "true"
# The format of mapping file should be MAC,hostname,IP and must be a CSV file.
mapping_file_exists: "false"

# The dhcp range for assigning the IP address to the baremetal nodes.
dhcp_start_ip_range: "172.17.0.20"
dhcp_end_ip_range: "172.17.0.100"