Struct ocl::flags::DeviceFpConfig

pub struct DeviceFpConfig { /* fields omitted */ }

cl_device_fp_config - bitfield

Methods

impl DeviceFpConfig

pub const DENORM: DeviceFpConfig

DENORM: DeviceFpConfig = DeviceFpConfig{bits: 1 << 0,}

pub const INF_NAN: DeviceFpConfig

INF_NAN: DeviceFpConfig = DeviceFpConfig{bits: 1 << 1,}

pub const ROUND_TO_NEAREST: DeviceFpConfig

ROUND_TO_NEAREST: DeviceFpConfig = DeviceFpConfig{bits: 1 << 2,}

pub const ROUND_TO_ZERO: DeviceFpConfig

ROUND_TO_ZERO: DeviceFpConfig = DeviceFpConfig{bits: 1 << 3,}

pub const ROUND_TO_INF: DeviceFpConfig

ROUND_TO_INF: DeviceFpConfig = DeviceFpConfig{bits: 1 << 4,}

pub const FMA: DeviceFpConfig

FMA: DeviceFpConfig = DeviceFpConfig{bits: 1 << 5,}

pub const SOFT_FLOAT: DeviceFpConfig

SOFT_FLOAT: DeviceFpConfig = DeviceFpConfig{bits: 1 << 6,}

pub const CORRECTLY_ROUNDED_DIVIDE_SQRT: DeviceFpConfig

CORRECTLY_ROUNDED_DIVIDE_SQRT: DeviceFpConfig = DeviceFpConfig{bits: 1 << 7,}

pub fn empty() -> DeviceFpConfig

Returns an empty set of flags.

pub fn all() -> DeviceFpConfig

Returns the set containing all flags.

pub fn bits(&self) -> u64

Returns the raw value of the flags currently stored.

pub fn from_bits(bits: u64) -> Option<DeviceFpConfig>

Convert from underlying bit representation, unless that representation contains bits that do not correspond to a flag.

pub fn from_bits_truncate(bits: u64) -> DeviceFpConfig

Convert from underlying bit representation, dropping any bits that do not correspond to flags.

pub fn is_empty(&self) -> bool

Returns true if no flags are currently stored.

pub fn is_all(&self) -> bool

Returns true if all flags are currently set.

pub fn intersects(&self, other: DeviceFpConfig) -> bool

Returns true if there are flags common to both self and other.

pub fn contains(&self, other: DeviceFpConfig) -> bool

Returns true all of the flags in other are contained within self.

pub fn insert(&mut self, other: DeviceFpConfig)

Inserts the specified flags in-place.

pub fn remove(&mut self, other: DeviceFpConfig)

Removes the specified flags in-place.

pub fn toggle(&mut self, other: DeviceFpConfig)

Toggles the specified flags in-place.

pub fn set(&mut self, other: DeviceFpConfig, value: bool)

Inserts or removes the specified flags depending on the passed value.

Trait Implementations

impl Octal for DeviceFpConfig

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Clone for DeviceFpConfig

fn clone(&self) -> DeviceFpConfig

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl BitOr<DeviceFpConfig> for DeviceFpConfig

type Output = DeviceFpConfig

The resulting type after applying the | operator.

fn bitor(self, other: DeviceFpConfig) -> DeviceFpConfig

Returns the union of the two sets of flags.

impl Ord for DeviceFpConfig

fn cmp(&self, other: &DeviceFpConfig) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl FromIterator<DeviceFpConfig> for DeviceFpConfig

fn from_iter<T>(iterator: T) -> DeviceFpConfig where     T: IntoIterator<Item = DeviceFpConfig>,

Creates a value from an iterator.

impl BitXor<DeviceFpConfig> for DeviceFpConfig

type Output = DeviceFpConfig

The resulting type after applying the ^ operator.

fn bitxor(self, other: DeviceFpConfig) -> DeviceFpConfig

Returns the left flags, but with all the right flags toggled.

impl Eq for DeviceFpConfig

impl SubAssign<DeviceFpConfig> for DeviceFpConfig

fn sub_assign(&mut self, other: DeviceFpConfig)

Disables all flags enabled in the set.

impl Not for DeviceFpConfig

type Output = DeviceFpConfig

The resulting type after applying the ! operator.

fn not(self) -> DeviceFpConfig

Returns the complement of this set of flags.

impl Binary for DeviceFpConfig

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Sub<DeviceFpConfig> for DeviceFpConfig

type Output = DeviceFpConfig

The resulting type after applying the - operator.

fn sub(self, other: DeviceFpConfig) -> DeviceFpConfig

Returns the set difference of the two sets of flags.

impl Hash for DeviceFpConfig

fn hash<__H>(&self, state: &mut __H) where     __H: Hasher,

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where     H: Hasher,

Feeds a slice of this type into the given [Hasher].

impl BitOrAssign<DeviceFpConfig> for DeviceFpConfig

fn bitor_assign(&mut self, other: DeviceFpConfig)

Adds the set of flags.

impl PartialEq<DeviceFpConfig> for DeviceFpConfig

fn eq(&self, other: &DeviceFpConfig) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &DeviceFpConfig) -> bool

This method tests for !=.

impl LowerHex for DeviceFpConfig

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Debug for DeviceFpConfig

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl BitAndAssign<DeviceFpConfig> for DeviceFpConfig

fn bitand_assign(&mut self, other: DeviceFpConfig)

Disables all flags disabled in the set.

impl Extend<DeviceFpConfig> for DeviceFpConfig

fn extend<T>(&mut self, iterator: T) where     T: IntoIterator<Item = DeviceFpConfig>,

Extends a collection with the contents of an iterator.

impl BitXorAssign<DeviceFpConfig> for DeviceFpConfig

fn bitxor_assign(&mut self, other: DeviceFpConfig)

Toggles the set of flags.

impl BitAnd<DeviceFpConfig> for DeviceFpConfig

type Output = DeviceFpConfig

The resulting type after applying the & operator.

fn bitand(self, other: DeviceFpConfig) -> DeviceFpConfig

Returns the intersection between the two sets of flags.

impl PartialOrd<DeviceFpConfig> for DeviceFpConfig

fn partial_cmp(&self, other: &DeviceFpConfig) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &DeviceFpConfig) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &DeviceFpConfig) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &DeviceFpConfig) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &DeviceFpConfig) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for DeviceFpConfig

impl UpperHex for DeviceFpConfig

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.